tozoM8

So I took the valve body out again, and this is what I found.

<img src="http://pictureposter.audiworld.com/80919/dscn1558.jpg">

<img src="http://pictureposter.audiworld.com/80919/dscn1560.jpg">

Wait a minute, where is that red stuff that I put a week ago? It got completely washed out. So the anaerobic sealer is Not what we want. I put the paper gasket ,that I made yesterday.

PaulW

Okay....and the results?

tozoM8

Brake E is for the second gear and I need to do some research, why it is not breaking.

GDJT Allroad^2

Yikes! ... 2nd gear may be where the gasket went

KaMaKaZieP -ALUMIN8-

Can you swap valve bodies?

tozoM8

That is the plan for tomorrow.

KaMaKaZieP -ALUMIN8-

Do you have a schematic of where the fluid goes? I bet you te sealer is all caked up in 1 spot. I would take apart the tranny filter and see if there is any red stuff in the filter.

skiracer

Did you use the primer, and how long did you let it cure before filling with fluid?

tozoM8

The sealer is completely dissolved in the fluid. I found a few little spots and they were still soft like grease. It couldn't block anything.

badmyan

Yikes is right. Post needed a warning or somthing, It's just before bed time and I read this. Oh God