maximumsp

Hello, I recently met and had help from member hanilanzi. He was going to do an MMI update but we couldnt get it to complete. Errors in pics below. Disc 1 of 2 didnt let us select any update options. Disc 2 of 2 had all updated options selected but didnt lets us delected anything. It didnt work since it didnt pull any data from disc 1.

Any care to also take a look at my Vag Com results and let me know if you see anything I should be awere of.

Thank you


Pics of MMI while trying to update







Vag-Com

http://mail-attachment.googleusercon...9CYkA&sadssc=1

JohnnyJ A6Q

I don't think you can go all the way to 4140 from 0600 without at least going to 2750 first, but from what I have read one could go straight to 4610 from any version, but why not play it safe with this old {first version} and follow the steps below.


North America versions:
0600 (0.6.00) -
1190 (1.1.90) -
2750 (2.7.50) - version 2750 and below have to be upgraded to 3360 before upgrading to a higher version
3310 (3.3.10) -
3360 (3.3.60) - {Update CD p/n 4F0 906 961AB}
4140 (4.1.40) - {Update CD p/n 4L0 906 961 H}
4610 (4.6.10) - {Update CD set p/n 4F0 998 961

maximumsp

Ebay?

mishar

4F0 998 961 here.

maximumsp

We already have that one (4610).

I need 3310 so than I can go to 4610 correct?

mishar

No. You go strait to 4610.

maximumsp

But that is what my thread is about. It wont let me go to 4610.

mishar

But you newer said that. It should go strait to 4610.

maximumsp

Thanks for the response Mishar but huh? What? I dont understand

JohnnyJ A6Q

did you not state that you were using the second from last SW update before you edited your post today, that {2nd from last} would be 4140, now Mishar I may be wrong, but I know one can go from xxxx to 4610, buy not sure on the 0600, as when I did my 04 I went from 2750 to 3360, now on my 05 I completely flashed from Euro 2120 iirc to US 4610, but I swear the OP said 2nd from last, which is 4140 and is not a repair kit and therefore will not allow from 0600 forward.