Amadeus

I am in the process of changing my outer CV joint boots. During the "clean the joints" phase, I removed all the ball bearings. I have since learned that this is a no-no. There is no hope of mating ***** to their original seats. I did segregate left side from right side. Is the joint going to self-destruct, or can I put it all back together and go?

If I need new joints, are the ones you can get locally any good, or should I stick to the on-line German auto parts places?

Thanks

4Driver4

No. Just put it back together.

Edd W

With grease and not grit, CV joints are very strong. Just re-assemble it and see what happens.

Amadeus

I have not been on the highway yet, but things feel ok around town. I screwed up one band clamp (it is a bit askew), hopefully I can find one locally to replace it.

First time I have ever messed with cv joints. Quite the experience.

Next up - a complete tune up, and possibly oxygen sensors.

Edd W

The second and third CV boots you do get easier every time. Part of owning an Audi.