martinlatimer

when should i replace a bad wheel bearing o the left from of my 87 4kq
now its just sounds like loud tire noise

also how hard is this?

i searched the forum and heard different things

keep on rocking

ps first post from new computer

unipurify

if you have an in-car bearing presser. If not, you have to balance the whole strut, ect while you press it out manually.

4kq4snow

I replaced a rear wheel bearing with the strut still in the car. I rented the bearing removal tool for $20 where I bought the bearing. The circlips are a real b**** to get out(be sure to get new ones with the bearing), mine were seriously rusted in place. Yes, it's possible, it rates right up there in 'testing your patience' but is manageable if you're used to working on Audi's.

Dave

porterdog

Check for play; they'll get REALLY loud before there's noticable play IME

unipurify

Use one of those infared thermometers. After a long drive 25-30 min, point it at the bearing on each side. If one is way hotter than the other one, it's bad.

rocketaudi

oops!

MikTip

<center><img src="http://home.ec.rr.com/miktip/wheelbear.jpg"></center><p>

JeromeS.

Damn! How much end play did it have? lol. an inch?

rocketaudi

never checked.. but it screamed like hell before it went