PDX-Boy[hermit mode]

older cars?

I have one now and I want to know if there's any way I can put my old AH key in there to have it be the key.

Thanks guys!

SteveAngry

<center><img src="http://pictureposter.audiworld.com/4612/parts_car_parted_010.jpg"></center><p>BTDT.

You just need to grind off some off the key and then use a dremel to put a groove on the key so the pin will hold it...

Steve
Michigan

PDX-Boy[hermit mode]

Since I don't have access to a dremel and I wouldn't trust myself to do that.... if I sent it out your way Stephen, could you do it for me?

Obviously you'd need a spare key of mine for my car right?

SteveAngry

you can send it my way...

I just got a new Dremel and a grinder for X-mas so it wouldn't be much of a problem for me...

I'll need:
1 Switch key

1 New metal key(don't send me the oem plastic handled one)

1 Shipping envelope with return postage.

LMK.

Steve
Michigan

Max'sCoupeGT

<center><img src="http://64.207.2.92/quattros/max/key2.jpg"></center><p>did exactly that, but I lost the little pin. So, I just slathered the end of the key with epoxy, and it's held strong ever since.

PDX-Boy[hermit mode]

So I'll send you:

1) Switchblade key
1) Copied OEM metal key with no plastic
1) Envelope with shipping + return shipping cost

Now I just need you to send me your address.

Thanks for doin this for me man.

I'll probably try and get it out to you on Monday and hopefully have it back the following week from you?

Anyways, thanks again!

19885ktqcd in Wa. st

I'm going to do the same..I have a few switchblade keys that I'm going to convert.

PDX-Boy[hermit mode]

I'll try and get it sent out on Monday.

SteveAngry

ankneys at vwmail.net

Steve
Michigan

PDX-Boy[hermit mode]

YGM!