Pre95

So when I bought my 20v the front grill has always sat inward on the bottom and not lined up with the headlights (nowhere near flush) and I believe im missing some parts to make it do this but I have no idea what is supposed to be there to begin with. Anyone have the etka blowup or something alike?

95ninety

Grill

<img src="http://pictureposter.audiworld.com/113690/b3grill.jpg">

95ninety

the bumper may be different but am not sure if euro b3s had different bumpers than american ones. The grill should be the same though.

Pre95

I will be saving these pics though they will come in handy .. Once my home PC is back on highspeed I MUST have etka

95ninety

didn't read properly but I will post the other ones so you can save them

95ninety

Hood

<img src="http://pictureposter.audiworld.com/113690/b3bonnet.jpg">

Front End

<img src="http://pictureposter.audiworld.com/113690/b3front.jpg">

Bumper

<img src="http://pictureposter.audiworld.com/113690/b3_bumper.jpg">

Pre95

It looks like on either end of the top of my grill i am missiong something that slips on or pushes it out from the metal cross bar the top mounts to. I will take a pic of what im talking about on my break

Hybrid_Hatch

have you tried adjusting the headlights?

95ninety

look at my first post I fixed it and posted the grill assembly

Pre95

It looks like the front headlights are mounted off, the grill isnt mounted properly, and I have a large gap between thw trim that lies beneath the headlights and the front bumper. So Whatever the case Im sure this is going to be a drawn out process to realign everything in the front properly. I noticed a lot of zipties and some losse items when I did my timing belt and also noticed the headlights werent mounte dproperly (the top mounting screws arent in the proper position).

I figured I would really dig in when I get a new set of headlights (these ones have damage).