look what i found. alot of you guys told me it dident exist,
07-02-2003, 06:24 PM
#1
New Member
Thread Starter
Join Date: Dec 2002
Posts: 108
Likes: 0
Received 0 Likes
on
0 Posts
look what i found. alot of you guys told me it dident exist,
Audi 12 valve Supercharger by MotoDyne
Up to 50% horsepower increase
Up to 55% torque increase
Custom one piece intake manifold to use the reliable Lysholm rotor group
Custom KM Japan Motodyne Hitachi chip
Factory- look appearance
Modular installation
Everything included for a complete installation
with the highest quality hardware
--------------------------------------------------------------------------------
The MotoDyne supercharger features a heavy wall casting for (sound deadening) and wrap around fins for strength and cooling.
The 1600 Lysholm supercharger is one of the best twin screw compressors worldwide. It matches the Audi's mechanical finish perfectly with its metric hex hardware, enhanced by a hi-temp black powder coat and machined finish; it's an absolutely perfect match.
The Motodyne supercharger makes positive pressure right off idle for smooth, powerful engine response right to redline.
Squeeze the throttle in any gear for instant acceleration. Smooth flowing runners and plenum to deliver matched power and torque. With a superior drive belt configuration of 90 percent belt wrap on the blower drive pulley there is no wasted boost under load from belt slippage or power steering cut out in bad weather due to a mis-configured idler and belt orientation. A Bosch bypass valve relieves the blower pressure at idle and light-throttle cruise to maintain the best gas mileage.
When not under boost, it only takes 1/3-horsepower to turn the twin-rotors.
MotoDyne engineered this supercharger to be modular, simple installation that can be completed in about 3 hours. Premium fuel is required, ECM preparation included. Complete with all parts necessary for installation.
In Production for 12 Valve:
Audi
A4 96-97
A6 95-97
100 92-94
90 92-95
Cabriolet 92-up<ul><li><a href="http://www.motodyne.com/frames/12vsc.html">http://www.motodyne.com/frames/12vsc.html</a</li></ul>
Up to 50% horsepower increase
Up to 55% torque increase
Custom one piece intake manifold to use the reliable Lysholm rotor group
Custom KM Japan Motodyne Hitachi chip
Factory- look appearance
Modular installation
Everything included for a complete installation
with the highest quality hardware
--------------------------------------------------------------------------------
The MotoDyne supercharger features a heavy wall casting for (sound deadening) and wrap around fins for strength and cooling.
The 1600 Lysholm supercharger is one of the best twin screw compressors worldwide. It matches the Audi's mechanical finish perfectly with its metric hex hardware, enhanced by a hi-temp black powder coat and machined finish; it's an absolutely perfect match.
The Motodyne supercharger makes positive pressure right off idle for smooth, powerful engine response right to redline.
Squeeze the throttle in any gear for instant acceleration. Smooth flowing runners and plenum to deliver matched power and torque. With a superior drive belt configuration of 90 percent belt wrap on the blower drive pulley there is no wasted boost under load from belt slippage or power steering cut out in bad weather due to a mis-configured idler and belt orientation. A Bosch bypass valve relieves the blower pressure at idle and light-throttle cruise to maintain the best gas mileage.
When not under boost, it only takes 1/3-horsepower to turn the twin-rotors.
MotoDyne engineered this supercharger to be modular, simple installation that can be completed in about 3 hours. Premium fuel is required, ECM preparation included. Complete with all parts necessary for installation.
In Production for 12 Valve:
Audi
A4 96-97
A6 95-97
100 92-94
90 92-95
Cabriolet 92-up<ul><li><a href="http://www.motodyne.com/frames/12vsc.html">http://www.motodyne.com/frames/12vsc.html</a</li></ul>
07-02-2003, 06:32 PM
#4
Re: look what i found. alot of you guys told me it dident exist,
uhm...I hope you are being sarcastic. That website, as a whole, is FULL of total and utter BS. I've read just about every page on there...I haven't figured out what building they are claiming as their own, yet.
If you buy one of those, allow me to be first in line to kick you square in the nuts, then console you when they run off with your money, and never deliver a product to your door step.
If you buy one of those, allow me to be first in line to kick you square in the nuts, then console you when they run off with your money, and never deliver a product to your door step.
07-02-2003, 06:37 PM
#6
Re: how doesent it the web site proves it
The actions of the company disprove it, and the fact that the pictures I have seen of the "kit" are of the blower and parts laying on the ground...That, and the absolutely HORRIBLE reputation they have should steer you far away from them.
07-02-2003, 06:38 PM
#7
AudiWorld Super User
Join Date: May 2003
Posts: 3,309
Likes: 0
Received 0 Likes
on
0 Posts
minding my Ps and Qs to avoid the threatened litigation....
but it is MY UNDERSTANDING that the individual(s) who run that company have a history of duping people and there is an informative website illustrating their previous shady dealings with people. I MAY BE WRONG but I understand they have been described as con artists.<ul><li><a href="http://www.urs4.com/kurbin/kurbin.htm">http://www.urs4.com/kurbin/kurbin.htm</a</li></ul>
Trending Topics
07-02-2003, 06:47 PM
#9
No Bozos!
Join Date: Mar 2002
Location: Cowlesville, NY.... Pop 1,067
Posts: 7,899
Likes: 0
Received 0 Likes
on
0 Posts
Yamaha
This guy has been around way too long.
It's one scam then another.
Just look how many EBay alias' he has for starters.
The mere mention of his name sends shivers down everyone's spine.
It's one scam then another.
Just look how many EBay alias' he has for starters.
The mere mention of his name sends shivers down everyone's spine.
