Which manual is correct for torque specs ALLDATA or Gates?
07-09-2007, 09:33 PM
#1
New Member
Thread Starter
Join Date: Oct 2006
Posts: 195
Likes: 0
Received 0 Likes
on
0 Posts
Which manual is correct for torque specs ALLDATA or Gates?
I did my timing belt and all that other fun stuff with no complications BUT I have 2 different manuals telling different torque settings for the AAH engine. Gates says the camshaft bolt is 55 lbs and ALLDATA says 23 lbs + 180degrees. For the crankshaft bolt the Gates says 200lbs and ALLDATA says 148lbs+180 degrees. I did put a new crankshaft bolt and I followed ALLDATAs torque specs I hope I chose correct.
Thread
Thread Starter
Forum
Replies
Last Post
AudiQua
Audi 90 / 80 / Coupe quattro / Cabriolet
3
08-21-2014 04:53 PM
Mark'sA8L
A8 / S8 (D2 Platform) Discussion
4
08-21-2007 06:25 PM
The Schwa
Audi 4000 / Coupe GT Discussion
0
04-01-2007 02:22 PM
bogelo
12v V6 Discussion
5
04-22-2003 01:55 AM
