DDMan

So I have been reading up on getting new mounts (my drivetrain has alot of slop) and was just wanting to confirm a few things.

1. Will the Allroad trans mounts fit a B3 90Q? I have heard them fitting the B4 and B5 A4, but nothing really on the B3.

2. What options are there for stiffer/new motor mounts? In the 4k forum they mentioned these work for them...are they the same for the B3 90's?
https://forums.audiworld.com/4000/msgs/99481.phtml

I tried to search but too many of the pics were missing and there were SO many posts. Thanks!

virtuapete

i dont know about #2, but i have a CQ (B3) and have used allroad mounts throughout

DDMan

Also, how many total would we need for the whole drivetrain? My guess is 4, 2 trans and 2 diff.

virtuapete

its a 2 + 1 config... one snub up front and one on each side... the rear diff has one in the rear. I have poly rear diff, allroad trannys and new stock motor mounts with poly snub.

DDMan

Then need to install the motor and diff mounts?

Everywhere I have read it is 2 trans, 2 engine (plus front snub) and then 2 rear.

Im confused.

virtuapete

the rear is still part of the tranny... thats what i was refering to, sorry

Merkin

1. <img src="http://pictureposter.audiworld.com/31824/a4_mount.jpg">

Merkin

A4 mounts are $15 and almost as good

Merkin

1 rear diff center pressed mount, front snub mount, misc pressed subframe mounts.

DDMan

Ya...thats my next thought. Can I get a P/N or at least what year/engine/trans type