grillage

Sorry -- that second picture should have the following caption

1 - Tachometer Checking engine speed (RPM) signal
2 - Digital clock
3 - Symbol plate
4 - Warning light housing
5 - Speedomete
6 - Screws
7 - Analog clock Not applicable for USA/Canada
8 - Digital clock reset button
9 - Engine Coolant Temperature (ECT) gauge
10 - Adjusting **** For instrument panel light dimmer switch and/or Auto-Check system test
11 - Tachometer mounting plate
12 - Screw
13 - Printed circuit
14 - Washer
15 - Nuts, M4
16 - Screw
17 - Instrument panel light dimmer switch
18 - Washer
19 - Nuts, M3
20 - Screw For Mini-Check or Auto-Check/Trip computer display unit
21 - Mini-Check display unit Removing and installing
22 - Auto-Check/Trip computer display unit
23 - Trip computer range calibration
24 - Engine Coolant Temperature (ECT) warning light/symbol
25 - Brake warning light
26 - Oil pressure warning light
27 - Warning and indicator lights
28 - Washer
29 - Nut, M4
30 - Voltage stabilize
31 - Heat sink
32 - Speedometer screw
33 - Speedometer mounting plate
34 - Fuel gauge adjusting ****
35 - Fuel gauge

36 - Felt washer

grillage

I'm retarded today.

here is the correct caption for that photo.


1 - Oil pressure warning light
2 - Engine Coolant Temperature (ECT) warning light/symbol
3 - Brake warning light
4 - Screw For Mini-Check display unit
5 - Instrument cluster illumination lamps
6 - Harness connector For speedometer
7 - Screw
8 - Screw For voltage stabilizer
9 - Voltage stabilizer
10 - Heat sink
11 - Printed circuit
12 - Screw
13 - Screw For speedometer
14 - Screw For speedometer mounting plate
15 - Speedometer mounting plate
16 - Tachometer mounting plate
17 - Speedometer
18 - Fuel gauge Inserted into front frame
19 - Fuel gauge adjusting ****
20 - Felt washer
21 - Warning light housing
22 - Symbol plate
23 - Adjusting **** For instrument panel light dimmer switch and/or Auto-Check system test
24 - Engine Coolant Temperature (ECT) gauge Inserted into front frame
25 - Tachometer Checking Engine Speed (RPM) signal
26 - Digital clock screws
27 - Digital clock
28 - Digital clock reset button
29 - Screw For tachometer
30 - Screw For tachometer mounting plate
31 - Instrument panel light dimmer switch
32 - Washers
33 - Nuts
34 - Turn signal indicator light
35 - Warning and indicator lights Bulb identification
36 - Mini-Check system display unit
37 - Auto-Check system/Board computer display unit

coriard

It's a little unclear... Could you post some 'after' photos of the dash lights or are you still in the process?

Thanks! I'll probably be following in your footsteps.

SC_09iduA

I did post some after photos but its hard to see what it actually looks like outside of just a photo. The dash lights are bright and robust and you can literally HARDLY see the "hot spots" some get from swapping to LEDs. I have one bulb still giving me a bit of trouble...mainly because I have hotdog sized fingers and this is an intricate board to be twisting small bulbs into place. I had to adjust some of the bulbs that I at first thoguht were not working to light back up. Simply by twisting to the "right" spot the bulbs light up...I found it easiest to do witht he cluster not screwed in the dash and loosley on top of the steering wheel column so you can see the bulbs light up when they are turned correctly.

SC_09iduA

And also even better: Do all the "1s" there are six of them, and the 7th will be "8" for the clock to light up. The tough one I'm struggling with due to not having toy making hands is the second "1" from (or third) from left to right. It close to the speedo guts and is tough to turn in other directions once its in place. Hope this helps a bit