Turn Signals Stopped Working
#11
![Default](https://www.audiworld.com/forums/images/icons/icon1.gif)
Check the actual fuse connections... (how I know)...
My 90q had the turn signals and wipers quit one night. Next day was a 1000km drive home... in the rain. Following weekend I tore everything apart... testing continuity, swapping spares, etc etc... nothing seemed to work. Occasionally the wipers would function, signals would kick on, etc...
In my frustration, I had shut off the lights in the shop (switch was right beside the fuse box), and the wipers tried to cycle... and I spotted the arc.
Fuse was fine... the little connectors in the fuse box has seperated and weren't making contact. HOURS AND HOURS of diagnosing/testing/swapping... 20 seconds to pull the fuse, grab a small flathead screwdriver, bend the contacts in the fuse box, and reinsert the fuse. worked fine.
Still working to this day... 5 years later.
No ignition switch replaced. No turn signal stalk replaced. No relays replaced.
My 90q had the turn signals and wipers quit one night. Next day was a 1000km drive home... in the rain. Following weekend I tore everything apart... testing continuity, swapping spares, etc etc... nothing seemed to work. Occasionally the wipers would function, signals would kick on, etc...
In my frustration, I had shut off the lights in the shop (switch was right beside the fuse box), and the wipers tried to cycle... and I spotted the arc.
Fuse was fine... the little connectors in the fuse box has seperated and weren't making contact. HOURS AND HOURS of diagnosing/testing/swapping... 20 seconds to pull the fuse, grab a small flathead screwdriver, bend the contacts in the fuse box, and reinsert the fuse. worked fine.
Still working to this day... 5 years later.
No ignition switch replaced. No turn signal stalk replaced. No relays replaced.
#12
Audiworld Junior Member
Thread Starter
Join Date: Mar 2010
Posts: 20
Likes: 0
Received 0 Likes
on
0 Posts
#13
AudiWorld Member
Join Date: Jan 2008
Location: maine/usa
Posts: 398
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://www.audiworld.com/forums/images/icons/icon1.gif)
There are some photos in this thread that may help you
https://www.audiworld.com/forums/sho...166571&page=10
https://www.audiworld.com/forums/sho...166571&page=10
#14
Audiworld Junior Member
Thread Starter
Join Date: Mar 2010
Posts: 20
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://www.audiworld.com/forums/images/icons/icon1.gif)
The ignition switch was cracked an melted. Pretty sure faulty trunk wiring is causing the wiper/signal fuse to blow, and will mess up the new switch as well I'm sure. Had it all working for about 2 seconds. Time to to get working on the wiring...
Thread
Thread Starter
Forum
Replies
Last Post
A4wheelin
Audi 4000 / Coupe GT Discussion
6
01-23-2008 04:33 PM
lrrr
Audi 90 / 80 / Coupe quattro / Cabriolet
6
11-22-2007 06:30 PM
OCDboy
Audi 4000 / Coupe GT Discussion
6
08-30-2007 12:21 PM
roots
A4 (B5 Platform) Discussion
2
05-14-2004 05:56 AM