DanAudi90

That is the bearing for the acc. belt tensioner - simple thing as i said and there is no way on this world i am paying $200 for that

SO WHERE TO BYU IT??????

egp320i

if you have the v6 you can pay 200 bucks to update the entire tensioner system which is alot better/efficient then the previous

DanAudi90

Well it is allready updated. This is the bearing for the new tensioner. I took it out today to check it out because i noticed a noice when you spin it. I do not need to buy the whole tensioner because of a stupid standard bearing -
It's NTN 6203LH - at least that's what it says on the seal.

egp320i

generally the updated wheel should last for ages. i replaced my whole system because the spare (unless wheel) was totally shot.
can't say offhand where you can get a spare for the wheel in the kit besides a dealer.
try impex and type in that pn, they have everything if you know the actual #<ul><li><a href="http://www.impexfap.com/">http://www.impexfap.com/</a</li></ul>

Catamount90

<center><img src="http://pictureposter.audiworld.com/20695/tensioner_pulley.jpg"></center><p><ul><li><a href="https://forums.audiworld.com/9080/msgs/84615.phtml">https://forums.audiworld.com/9080/msgs/84615.phtml</a></li></ul>