Last edit by: IB Advertising
See related guides and technical advice from our community experts:
- Audi A3 How to Install Lowering Springs<br>Step by step instructions for do-it-yourself repairs.
DIY Instructions for Installing Springs?
#11
Audiworld Junior Member
Thread Starter
Join Date: Jul 2015
Location: San Diego
Posts: 17
Likes: 0
Received 0 Likes
on
0 Posts
Not sure why the last pic of a green Q5 uploaded as I posted the pics from my phone and I have never seen and do not have any pictures of that car in my phone, but below is the last pic that was suppose to be uploaded.
#12
Audiworld Junior Member
Thread Starter
Join Date: Jul 2015
Location: San Diego
Posts: 17
Likes: 0
Received 0 Likes
on
0 Posts
As far as the install itself, it is just like the video that is in this thread. If not using power tools the you will need a 21mm deep offset wrench in order to remove the spring from the strut and an Allen wrench. The front drivers side take the most time to remove, the front passenger and rear ones are pretty easy. When removing the rear springs I would recommend placing a jack underneath as when you remove the 3 bolts in the back the entire assembly will snap down due to the pressure of the spring. Also, there is a small part that is connected only on the rear driver side and I would recommend removing it during the installation as it can break off. You can just pop it off from the bottom and put it back in place when you are finished (pictures below of the part).
#16
Non sport suspension
hey guys quick question, I have a 08 a3 standard suspension (not sport) so can I then turn around and buy struts/ shocks for a sport suspension or will I have to purchase for stand? And second which ones would you recommend? Any advice would be greatly appreciated since I'm think of replacing within this week or so.
Thread
Thread Starter
Forum
Replies
Last Post
automata
A6 / S6 (C5 Platform) Discussion
2
09-06-2001 03:01 PM
S4NoRice
S4 / RS4 (B5 Platform) Discussion
0
06-04-2001 07:17 PM
Peter Lorraine
A6 / S6 (C5 Platform) Discussion
10
04-17-2001 09:47 PM