dockirsch

Hi,

Would you happen to know how much more of a delay for:

Increase Delay for Driver Inactivity for Lane Assist

Description: Increases the delay before you get alert saying that you need to be steering when using lane assist.

• Front Sensors Driver Assistance System (A5)
  
• Adaptation
  
• Directional stabilization assist driver intact deactiv threshold
  
• Default value: Medium, New Value: late
  

paulhiggs

I just added Allow Navigation Panning while Driving. Works on my B9 S5 and 2018 Q5. Found this in the telematics forum (Nav lockout override) - not taking credit myself!

Daaavid

• Early (switches off the Lane Assist within 7 seconds)
• Medium (factory setting, switches off the Lane Assist within 7 to 10 seconds)
• Late (switches off the Lane Assist within 11 to 15 seconds)

paulhiggs

Has anyone tried activating the "Euro Parking Lights" feature? I was not able to find this in the "17-Dash Board" coding

Euro Parking Lights

Description: Enable parking lights on the left / right side with signal stalk when vehicle is off.

17 – Dash Board
Long Coding

Coding: parking_light_config
Default Value: not_active
New Value: single_side_parking_light

Daaavid

Yes, I have it activated on my '19. Try looking in Central Electric (09) instead.

paulhiggs

Thanks, that works - I changed the Google Doc on this

tonysaudi

Can anyone give me step by step instructions of how to get to the settings to make these adjustments. I have the app but don't know what to click on to be able to make the changes

2016Q5

DRL’s on with Turn Signal and Scandinavian DRLs (Tail lights on with DRLs)

This section appears to be missing the tail lights on with DRL instructions(?)

edit: This is the VCDS instruction for a B8 Q5
Enable Rear Tail Lights on with DRLs
[09 – Cent. Elect.] [Coding - 07] -> Long Coding Helper -> Byte 2
Bit 7 - DRL's via Tail Lights Active (1 = Active)

It's a feature I like running both front and rear lights all the time and use it on my Q5.

Daaavid

It's in the Google Doc. What are you referring to specifically?

If you follow the instructions in the doc, it will be exactly what you're looking for.

The B8s and B9s codings are different.

2016Q5

Thanks for the assist.
I must be reading it wrong then because I only see the first turn signal instructions not the rear DRL on instructions. Am I blindly missing it?:

Description: Do not turn off DRL’s when using the turn signal

• 09-Central Electrics
  
• Long Coding
  
• “sl_at_drl” Change from “not_active” to “active”
  
• Press and hold green check mark to accept