pyite20v

I had done the 402 mod successfully on another computer before aboud 2K miles ago, so I am thinking it should work again.

I really do not want to have to go to the dealer to get them to fix this.

Thanks for your ideas, keep them coming!!

paulroad

--if its out of spec then 402 could be too low or too high and the system will..lock up in fault mode.
This may be the probelem.

Set your car to level 2 and take your measurments. See what each corner is. Then enter the approbriate number to get it back to 402.

I think this is the problem you are having. The car has no "idea" what 402 is as it always thinks is in that position. All the mod does is "trick" the system into re setting itself to a new 402-home position.

Rally_nutcase_1982

We've had a similar problem with Milpower's ar, all the way down so the car could not even go through the channel 01 self setting routine.
Only the Jack mode let us go back in for changes.

Lets see the result is of your level 2 measurments and take it from there.

skidmark

it is after all a program built into the car to set/calibrate the height settings. you can't just assume that the height is correct to begin with, especially with all the used allroad being bought now.

03Indigo

It did not, I tried it with Mike and his VAG com...nothing worked, and the problem came back

quattro0001

You have to save all your settings in channel 5 for them to stay and be "learned by the controller"<ul><li><a href="https://forums.audiworld.com/allroad/msgs/32165.phtml">https://forums.audiworld.com/allroad/msgs/32165.phtml</a</li></ul>

pyite20v

I couldn't even get to Channel 2 before it started saying NA.

pyite20v

03Indigo, were you trying the 402 mod? What should I tell my dealer?

pyite20v

Once I enter in 31564 it clears out of jack mode, is this right?

want

As I know, the only way to clear the code is to complete the 402mod process. So try again and again