timboesch

Yes , i have heard the issues with the turn signal "sounds' etc.
I just replaced the hazard flasher relay and instead of the rapid click click click, the new one just buzzez. Help, the only diff between the old switch and new on is a code on back
OLD PNT: WBS+AK The new one WBS+AK+OMR

Please help, 2001 allroad

trg

Does it buzz when you have the stalk pulled all the way up/down, or just when it's partway?

ColoradoDriver

Had same thing happen. Replaced dash flasher then turn signal stalk. Fixed it.

UnoDosTurbosQuattro

Short-term "remedy" is to only activate turn signal with a full stalk push - don't "soft" signal. It may get significantly better - mine did.

Perhaps the intermittent connection creates arcing and contact wear.

paulroad

and it can be a faulty new flasher.

Don't know if the OMR is different, ask another dealer.

timboesch

No it does not buzz when turn signal is up or down , it does buzz as soon as I plug it in and the only way to get it to stop
is to unplug it. Thanks

timboesch

I have the turn signal stalk already purchased so I guess i have some plans tom. Thanks Tim

UnoDosTurbosQuattro

But would love to know the difference on the "OMR" suffix. Maybe it stands for Oops, Many Replacements...

all(over)road

Same symptons, erratic and/or stuck like a bulb was out or something...$40 plus a tip. 8-)

finiki

<ul><li><a href="https://forums.audiworld.com/allroad/msgs/254525.phtml">Click here for previous thread.</a></li></ul>