Anyone know where is the A/C service nipple on our UrS cars? thanks
#4
AudiWorld Senior Member
Great advice, chargers, except it is WRONG. Any checking on your part would show that freon charging equipment will not fit that port since it is not designed for that purpose and a work-around to make a fitting adapt could lead to damage to the compressor.
The system is serviced through the high pressure port on the compressor. There are fitting differences between R12 and R134a systems, so if you have an early model S4 you need to recognize the difference. There are some
who have used adapters to top off the system with the 12 oz cans, but you need to search for that information.
The system is serviced through the high pressure port on the compressor. There are fitting differences between R12 and R134a systems, so if you have an early model S4 you need to recognize the difference. There are some
who have used adapters to top off the system with the 12 oz cans, but you need to search for that information.
#5
AudiWorld Member
Join Date: Dec 2008
Location: Prince Albert, SK, Canada
Posts: 453
Likes: 0
Received 0 Likes
on
0 Posts
don't encourage him...lol, seriously needs to pull his (her?) head out of his *** and stop dredging up old posts........although, I guess in the big picture I'm a couple days late myself. In my defense I don't come by this forum much anymore. Let's not direct this one anywhere else..mmmkay? lol
Last edited by speedtek; 05-09-2010 at 03:46 PM.
Thread
Thread Starter
Forum
Replies
Last Post
Bullrich
Audi 90 / 80 / Coupe quattro / Cabriolet
1
04-19-2005 03:16 PM
jnormandeau(93100CSQuattro)
Audi 100 / A6 (C4 Platform)
6
08-09-2001 12:48 PM