Diverter valve
10-24-2011, 09:30 AM
#11
AudiWorld Member
Thread Starter
Join Date: May 2010
Posts: 105
Likes: 0
Received 0 Likes
on
0 Posts
Dave,
The first leak was on the turbo inlet hose at the turbo, about a 1" crack in the under side of the hose. Silicone taped it until the new silicone inlet hose arrives from 034 this week.
The other was at the CPC valve.
I finally bit the bullet and am swapping out all of the hoses for silicone ones from 034. I'm also going to replace all the vacuum hoses next week as well when I get some spare cycles.
There's still another small tiny leak somewhere in the system but I'm not going to worry about chasing that down till the new hoses arrive, I suspect they will solve the issue altogether. A full set of new T-bolt claps won't hurt either.
J
The first leak was on the turbo inlet hose at the turbo, about a 1" crack in the under side of the hose. Silicone taped it until the new silicone inlet hose arrives from 034 this week.
The other was at the CPC valve.
I finally bit the bullet and am swapping out all of the hoses for silicone ones from 034. I'm also going to replace all the vacuum hoses next week as well when I get some spare cycles.
There's still another small tiny leak somewhere in the system but I'm not going to worry about chasing that down till the new hoses arrive, I suspect they will solve the issue altogether. A full set of new T-bolt claps won't hurt either.
J
Last edited by Joe100S; 10-24-2011 at 09:34 AM.
Thread
Thread Starter
Forum
Replies
Last Post
