My windshield washer spray stopped working after I ran out (yes, I refilled it).
#11
AudiWorld Senior Member
Thread Starter
![Default](https://www.audiworld.com/forums/images/icons/icon1.gif)
The car wash bay was enclosed and quite steamy. I felt around the engine and the washer fluid hoses, everything was pretty warm. It was so balmy that I took off my jacket. The temp outside is -10C right now, but I'm sure it was above 0 in the car wash (water everywhere, none of it freezing on the car). After 30 minutes of blasting the engine (including turning the engine on with the hood closed and blasting hot water in from the bottom) things were quite steamy. But my washer fluid still doesn't spray, all I get is a small trickle out of the left nozzle.
NOW can I condiser it blocked?
NOW can I condiser it blocked?
#12
![Default](https://www.audiworld.com/forums/images/icons/icon1.gif)
most likely it's the small hoses on the underside of your hood. There could be some ice stuck right at the sprayer blocking everything else. Since you've soaked your engine/wires, etc you'd better make sure you run it for a while to get it dry or you might have more problems tomorrow morning at -10.