Derrick_K

I wanted to do a few pulls with the car stock and then compare when its done. I ran hp= 216.7@5330rpm and tq= 246.3@3141rpm. Stock on 91oct.

216whp seems high for having 227 at the crank. Are these numbers stock numbers?

UrS4boy

Sounds chipped.

Compare to this:

https://www.audiworld.com/forums/sho....php?t=2162139

"George" was supposed to be stock but we suspect his son's had chipped his car without him knowing.

Derrick_K

Thanks Dave. I will do some investigating in the ecu tomorrow.

quattro20v

Seems high for stock. What kind of dyno?

Derrick_K

Mustang dyno

Derrick_K

I have the ECU out of the car. Now how does it come apart? I have no desire of screwing it up.

UrS4boy

we do. It's still there, best viewed in Threaded View, searched with "Search in Page", "ECU" =

https://www.audiworld.com/forums/sho...php?p=18944123

Tom (90Carat)

FYI, my car is stock, and pulled 195 whp last summer.

Jonny K

Here's my stock car on a Mustang Dyno. Similar numbers:

http://members.shaw.ca/jonnydk/car/dyno.html

mr Blue

wow.. i hope i dont get yelled at for bringing this thread back from the dead and it being my first post as well but i just bought a 95 S6 that already had some mods (MTM Chip, RS2 exhaust, T3 tubo,Bilsteen shocks and Eibach springs). He said it Dynoed at 340hp... after reading this post that seems a little high but i ran it against my 99 prelude that has been Dynoed (built 4cyl and 11psi)and has 315hp at the wheels. we stayed side by side; S6 was in 5th gear and the lude was in 4th. The S6 would have pulled away if my son would have been in 4th in the S6. I am going to seach for ECU tuning on this forum; an recommendations on improving a new ECU or modding it for better acceleration?