adding CDC to symphony/RNS-e with OEM cable help?
#1
Audiworld Junior Member
Thread Starter
Join Date: Dec 2002
Posts: 58
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://www.audiworld.com/forums/images/icons/icon1.gif)
I have my RNS-e installed and running great with proxus adapter. Now i want to add my phatbox to it. I have the OEM CDC cable (4b0-051-735b). I found out on phatnoises install guide to use these pinout to the black 20pin connector.
Pin 10 = brown
Pin 13 = orange
Pin 14 = pink
Pin 15 = black
Pin 16 = blue
Pin 17 = yellow
Pin 18 = brown / black
Pin 19 = white
Pin 20 = red
So i was going to add the wires to the existing symphony connector since my rns-e adapter has the wires on it to pass it on. Only problem is that the original 20 pin connector already has wires into pins 18,19,20.
Do i just remove them? help?
Pin 10 = brown
Pin 13 = orange
Pin 14 = pink
Pin 15 = black
Pin 16 = blue
Pin 17 = yellow
Pin 18 = brown / black
Pin 19 = white
Pin 20 = red
So i was going to add the wires to the existing symphony connector since my rns-e adapter has the wires on it to pass it on. Only problem is that the original 20 pin connector already has wires into pins 18,19,20.
Do i just remove them? help?
Thread
Thread Starter
Forum
Replies
Last Post
EvanUrS4
Audi 5000 / 200 / V8 Discussion
5
08-25-2003 08:36 AM