Does anyone with a Double DIN HU that is planning on going to a single DIN want to swap parts???
#1
AudiWorld Senior Member
Thread Starter
Join Date: May 2001
Location: Port Coquitlam, BC
Posts: 1,526
Likes: 0
Received 0 Likes
on
0 Posts
Does anyone with a Double DIN HU that is planning on going to a single DIN want to swap parts???
here's the story. I have a 1999.5 Audi A4. I have the upgraded HVAC controls, but I have the single DIN opening, as well as the space below the ash tray.
Does anyone want to swap these pieces? I will give you the trim piece, the HVAC, ash tray etc, you give me your HVAC, trim piece, ash tray etc. that will allow us both a simple installation of our new stereos (I've recently purchased a double din HU)
Here's pics of what I'm talking about:
<img src="http://www.mts.net/~goodegg/stereo/DSCN0708.JPG">
<img src="http://www.mts.net/~goodegg/stereo/DSCN0709.JPG">
trim off, HVAC and backing stuff ready to come out
<img src="http://www.mts.net/~goodegg/stereo/DSCN0712.JPG">
<img src="http://www.mts.net/~goodegg/stereo/DSCN0722.JPG">
This offer it to a person with a 2000-2001.5 A4 with heated seats, or a 2000-2002 S4 with heated seats.
we would each be responsible for overnighting the parts to one another.
Does anyone want to swap these pieces? I will give you the trim piece, the HVAC, ash tray etc, you give me your HVAC, trim piece, ash tray etc. that will allow us both a simple installation of our new stereos (I've recently purchased a double din HU)
Here's pics of what I'm talking about:
<img src="http://www.mts.net/~goodegg/stereo/DSCN0708.JPG">
<img src="http://www.mts.net/~goodegg/stereo/DSCN0709.JPG">
trim off, HVAC and backing stuff ready to come out
<img src="http://www.mts.net/~goodegg/stereo/DSCN0712.JPG">
<img src="http://www.mts.net/~goodegg/stereo/DSCN0722.JPG">
This offer it to a person with a 2000-2001.5 A4 with heated seats, or a 2000-2002 S4 with heated seats.
we would each be responsible for overnighting the parts to one another.
#2
Re: Does anyone with a Double DIN HU that is planning on going to a single DIN want to swap parts???
How'd you remove the trim piece that is off in the pictures? I want to remove the trim piece and HVAC to get to the ashtray so I can install an EQ in place of the ashtray. Any tips well appreciated.
Thread
Thread Starter
Forum
Replies
Last Post
1.8Steve
Canadian Discussion
0
02-25-2003 05:58 PM
1.8Steve
S4 / RS4 (B5 Platform) Discussion
0
02-25-2003 05:57 PM
1.8Steve
A4 (B5 Platform) Discussion
0
02-25-2003 05:56 PM