XcellR8edAudi

Installing a CD player into my friend's 1988 Audi 90 quattro 5spd... it is an Alpine deck: CDE-7872... i installed a cd player into my 1988 Audi 90 fwd 4banger automatic and i don't remember having the same wires coming out of the dash than on this '88... when i installed the deck on my '88 we didnt get the needed wiring harness we just bought butt splicers to connect.. tryin to do the same on this. could you please help me out on what to connect to what. we have no wiring harness for this one-

Out of the Audi:
(1)dual brown wire
(2)dual green wires- 4 wires total
(1)dual white wire
(1)red with green stripe wire
(1)brown with red stripe wire
(1)blue with green stripe wire
(1)dual red wire
(1)gray with blue stripe wire
(2)thick black wires with plugs on the ends

Out of the Alpine Deck:
(1)blue =power antenna
(1)blue/white wire =remote turn on
(1) red wire = ignition
(1) yellow (with box with fuse in box)=battery
(1)black wire =GND (has lobster claw on it that says goes under battery cable with the terminal is)
(1)gray+ =speaker right front
(1)gray/black- =speaker right front
(1) violet/black- =speaker right rear
(1) violet = speaker right rear
(1) green+ =speaker left rear
(1) green/black- = speaker left rear
(1)white/black- =speaker left front
(1) white+ =speaker left front

please help me out... thanks

diagrams would be sweet too