ABS Module not communicating
03-04-2007, 09:54 PM
#1
AudiWorld Member
Thread Starter
Join Date: Oct 2000
Posts: 298
Likes: 0
Received 0 Likes
on
0 Posts
ABS Module not communicating
In my quest to get my ABS functioning again so this darn car can be sold my VAG tells me this:
Address 01: Engine
Part No: 3B0 907 551 G
Component: 2.8L V6/5V G 0003
Coding: 07251
Shop #: WSC 063251
Fault Found:18014 - Rough Road/Engine Torque Signal from ABS: Electrical
Malfunction P1606 - 35-00 - -Readiness: 0010 1001
When I try to connect to the 03 controller (ABS) I am told that VAG can not connect to the module.
This seems to mean one of two things
1) Dead ECU
2) Bad wires
Anyone have any ideas on troubleshooting this? Fuse 7 looks intact.
Thanks!
John-
Address 01: Engine
Part No: 3B0 907 551 G
Component: 2.8L V6/5V G 0003
Coding: 07251
Shop #: WSC 063251
Fault Found:18014 - Rough Road/Engine Torque Signal from ABS: Electrical
Malfunction P1606 - 35-00 - -Readiness: 0010 1001
When I try to connect to the 03 controller (ABS) I am told that VAG can not connect to the module.
This seems to mean one of two things
1) Dead ECU
2) Bad wires
Anyone have any ideas on troubleshooting this? Fuse 7 looks intact.
Thanks!
John-
Thread
Thread Starter
Forum
Replies
Last Post
S4MarkS4
S4 / RS4 (B5 Platform) Discussion
2
12-05-2005 10:48 PM
Silver Streakin'
A4 (B5 Platform) Discussion
2
04-30-2004 06:58 AM
Ok, have the VAG hooked up to my car with the ABS light on. Can't connect at all with the ABS proble
S4Del
S4 / RS4 (B5 Platform) Discussion
8
12-12-2003 04:23 PM
