Who's the resident car audio cabling expert near Montreal?...
#12
AudiWorld Super User
Join Date: Feb 2003
Location: Montreal
Posts: 5,139
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://www.audiworld.com/forums/images/icons/icon1.gif)
I started with the radio side and routed the cable to the driver side because the CD changer is on the same side in the truck.
I don't remember everything but the first thing I did was removed the driver`s lower side panels on the floor where the carpet is and the panel where the steering column is.
I passed the cable from the radio through the steering column area and then work it's way down to the floor and started to run along the sides then to the trunk area.
The thing is, try not to pass the RCA, speaker cable and so on...on the same side with power wires, like your 12v and turn on wire. It might introduce more "noise" to the amp.
I don't remember everything but the first thing I did was removed the driver`s lower side panels on the floor where the carpet is and the panel where the steering column is.
I passed the cable from the radio through the steering column area and then work it's way down to the floor and started to run along the sides then to the trunk area.
The thing is, try not to pass the RCA, speaker cable and so on...on the same side with power wires, like your 12v and turn on wire. It might introduce more "noise" to the amp.
Thread
Thread Starter
Forum
Replies
Last Post
carl viking
A8 / S8 (D3 Platform) Discussion
40
07-12-2024 02:45 PM
N'Syncro
Parts For Sale - Archive (NO NEW POSTS HERE)
33
02-16-2020 03:12 PM
stormchaser1967
New Member Welcome Area
0
09-01-2015 01:29 PM