osofast10

well i a haven't been able to get her to the DYNO to see what she puts down but here is the easy how to on the install..NOTE: I'M JUST NOOB, IF YOU DO THIS AND BLOW YOUR MOTOR OR ANYTHING IT'S ON YOU.. now on to the pictures


first what everyone wants to see so here goes...

before



after(i need to clean that area up BIG TIME)




engine bay



were my nitrous is.. note my intake.. it's about 4 inches after the MAF



step 1-- put car on jack stands



step 2 -- take out spair tire and pop out the hole near the front of the car (it's black) place bottle there and run the nitrous line through the hole



step 3 -- under the pass. side of the car there is a plastic cover... remove it and run the nitrous line next to the fuel lines






plastic part almost taken off



step 4 --> run nitrous line through pass. side wheel and up to engine bay

pass. side wheel



where it pops up from (also that black tube is the fuel line... take that rubber out and put in new one for the nitrous)





step 5 --> put the relay switch in the batter area




step 6 --> run the power cable to through the air filter



it comes out in the back of the glove area



step 7 --> hide all the wires from the nitrous




step 8 --> hook up the arm switch and the WOT switch

i placed my switch here and my audi book still fits in there too (gotta clean up the wires)





step 9 --> make sure all the wires are zip tied and hidden away






step 10 --> ENJOY

osofast10

hopefully i'll put it on the dyno sometime soon, so we can see real numbers

Jimax

well i a haven't been able to get her to the DYNO to see what she puts down but here is the easy how to on the install..NOTE: I'M JUST NOOB, IF YOU DO THIS AND BLOW YOUR MOTOR OR ANYTHING IT'S ON YOU.. now on to the pictures


first what everyone wants to see so here goes...

before

<img src="http://img99.imageshack.us/img99/7450/137_0686.jpg">

after(i need to clean that area up BIG TIME)

<img src="http://img99.imageshack.us/img99/7489/137_0687.jpg">


engine bay

<img src="http://img99.imageshack.us/img99/2158/137_0680.jpg">

were my nitrous is.. note my intake.. it's about 4 inches after the MAF

<img src="http://img99.imageshack.us/img99/4603/137_0675.jpg">

step 1-- put car on jack stands

<img src="http://img99.imageshack.us/img99/1631/137_0662.jpg">

step 2 -- take out spair tire and pop out the hole near the front of the car (it's black) place bottle there and run the nitrous line through the hole

<img src="http://img99.imageshack.us/img99/6472/137_0672.jpg">

step 3 -- under the pass. side of the car there is a plastic cover... remove it and run the nitrous line next to the fuel lines

<img src="http://img99.imageshack.us/img99/4215/137_0671.jpg">
<img src="http://img99.imageshack.us/img99/8641/137_0665.jpg">
<img src="http://img99.imageshack.us/img99/5683/137_0664.jpg">


plastic part almost taken off

<img src="http://img99.imageshack.us/img99/1949/137_0667.jpg">

step 4 --&gt; run nitrous line through pass. side wheel and up to engine bay

pass. side wheel

<img src="http://img99.imageshack.us/img99/7113/137_0670.jpg">

where it pops up from (also that black tube is the fuel line... take that rubber out and put in new one for the nitrous)

<img src="http://img99.imageshack.us/img99/6544/137_0669.jpg">
<img src="http://img99.imageshack.us/img99/5379/137_0668.jpg">


step 5 --&gt; put the relay switch in the batter area

<img src="http://img99.imageshack.us/img99/241/137_0677.jpg">


step 6 --&gt; run the power cable to through the air filter

<img src="http://img99.imageshack.us/img99/3863/137_0678.jpg">

it comes out in the back of the glove area

<img src="http://img99.imageshack.us/img99/3058/137_0679.jpg">

step 7 --&gt; hide all the wires from the nitrous

<img src="http://img99.imageshack.us/img99/7144/137_0681.jpg">
<img src="http://img99.imageshack.us/img99/3167/137_0691.jpg">

step 8 --&gt; hook up the arm switch and the WOT switch

i placed my switch here and my audi book still fits in there too (gotta clean up the wires)

<img src="http://img99.imageshack.us/img99/8340/137_0683.jpg">
<img src="http://img99.imageshack.us/img99/3396/137_0685.jpg">
<img src="http://img99.imageshack.us/img99/8340/137_0683.jpg">

step 9 --&gt; make sure all the wires are zip tied and hidden away

<img src="http://img99.imageshack.us/img99/2158/137_0680.jpg">
<img src="http://img99.imageshack.us/img99/7442/137_0689.jpg">
<img src="http://img99.imageshack.us/img99/2879/137_0690.jpg">


step 10 --&gt; ENJOY

osofast10

hahah thank you so much.. what do i have to do to make pictures work on here?

osofast10

one last note... this is not the final setup as i will change the switch up and hide the wires

BlueDog

If you plan on bringing it to the track it most certainly will not pass tech if the bottle is not secured.

osofast10

so i'm not worried about it.. i have to wait till i finish up the holder to do anything... and hopefully when i take it to the track they won't even notice the nitrous

mountainsurfer77

pretty sure you just need to take off the [IMG] and [/IMG] before and after your link.

Wind-n-Water

replace <b>[IMG]</b><i>image_url</i><b>[IMG]</b>

with

<b>[img src="</b><i>image_url</i><b>"]</b>
(but instead of using "[]" above, use "&lt;&gt;")

TRANS4M

<ul><li><a href="https://www.audiworld.com/forum/faq.shtml#11">https://www.audiworld.com/forum/faq.shtml#11</a</li></ul>