RMCQ question for ya, how hard is it to remove the front axles?
#2
![Default](https://www.audiworld.com/forums/images/icons/icon1.gif)
This bolt can come loose in 15 seconds or it can reduce grown men to sobbing, wasted shells of DIY enthusiasm covered in PB Blaster and metal shavings.
Assuming you get the pinch bolt out there isn't much too it. Before you jack the car loosen the axle end bolt (you might need a 17mm allen tool). You remove all the bolts around the transaxle (assuming we are talking front) flange and then remove the axle end bolt all the way. Pull the joint out of the suspension upright with the wiggle room afforded by removing upper control arms (pinch bolt).
That's really it. The whole job hinges on the pinch bolt. How long has it been in place? Much salt driving?
Assuming you get the pinch bolt out there isn't much too it. Before you jack the car loosen the axle end bolt (you might need a 17mm allen tool). You remove all the bolts around the transaxle (assuming we are talking front) flange and then remove the axle end bolt all the way. Pull the joint out of the suspension upright with the wiggle room afforded by removing upper control arms (pinch bolt).
That's really it. The whole job hinges on the pinch bolt. How long has it been in place? Much salt driving?
#7
![Default](https://www.audiworld.com/forums/images/icons/icon1.gif)
There is a possibility that I could help if you really need it, but I'm not going to pretend that I can burn whole days doing mod sessions with AWMA. Not that I don't want to be helpful, but I have 3 kids, wifey, a boat to dewinterize, trophy rockfish to catch starting April 15th, a business purchase to conclude, a job to quit, lacrosse to coach, a PTA fundraising 5K race to chair, and my HOA board seat to occupy.
It might be easier for me if you came to my garage for some in and out service, but the pinch bolt is too risky. You would have to break the pinch bolt free first and if successful bring it over and we could swap the axles in little time.
It might be easier for me if you came to my garage for some in and out service, but the pinch bolt is too risky. You would have to break the pinch bolt free first and if successful bring it over and we could swap the axles in little time.
Trending Topics
#8
![Default](https://www.audiworld.com/forums/images/icons/icon1.gif)
He was even kind enough to let me drop ship my H-Sports to his house, and then I drove to him as he helped me with the install. Scheduled a weekend where he was free, and we knocked it out.
Thread
Thread Starter
Forum
Replies
Last Post
ECS Tuning-Audi
A4 (B8 Platform) Discussion
22
05-11-2024 04:38 PM
Curtisjh
A6 / S6 (C6 Platform) Discussion
7
09-04-2015 04:06 AM
ECS Tuning-Audi
Audi A5 / S5 / RS5 Coupe & Cabrio (B8)
0
09-01-2015 08:27 AM