JumboBlack1.8

I'm parting out an early AEB engine, but I can't find the head tool anywhere locally. I was told NAPA should've had it, but no luck. Does anyone around Boston have a headbolt tool for an AEB motor that I can borrow? I'm looking for the 10mm 12-point/Triple Square bit. heres a link:
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&ssPageName=STRK:MEWAX:I T&item=170200085758
The tool for the newer model 1.8T's won't work, since the bolts are different. PLEASE help. I need it ASAP. I'd rather not order it, because I won't have a use for it anymore. Please lemme know if you've got one

4Driver4

Are you sure it isn't polydrive?

JumboBlack1.8

yea, I'm sure. The poly-drive is for AWM and up, i believe....the 12-point is for AEB and ATWs

Ray Khan

I have a 10mm 1/2" hex drive if you want to try it. I'm in Melrose.

JumboBlack1.8

4" long or else it wont fit

DxC

you can get 10mm triple sq from any auto parts store like autozone

JumboBlack1.8

Really??? I'll definitely check that out tomorrow and report back. Thanks!

Ray Khan

what I have I got from an autozone a few years back.

ScratchRob13

You can grind down a Torx to work... done it before.

kday

Anyway, I do have both bits in my garage in Arlington. But as mentioned above the 10mm XZN bit is not hard to find at retail auto parts stores. (I had to chase down a Snap-On guy to get the polydrive bit though...)