Detailed Dension Gateway 500 Installation instructions w/ lots of pictures...
#11
AudiWorld Senior Member
Thread Starter
![Default](https://www.audiworld.com/forums/images/icons/icon1.gif)
I also retrofitted a NAV and for this, I indeed needed to drop the roof panel to get to the FAKRA antenna cable for the NAV. An extension cable was snaked down to the wheel well for the NAV unit. In my case, the SAT antenna was already snaked all the way down to the cubby hole where the SAT radio goes but not for the NAV. I cannot understand why Audi did it this way.
#16
Audiworld Junior Member
![Default](https://www.audiworld.com/forums/images/icons/icon1.gif)
"The adapters will be released allowing the fiber cables for connection. "
Where do they connect?
Where do they connect?
#17
AudiWorld Junior Member
![Default](https://www.audiworld.com/forums/images/icons/icon1.gif)
I'm trying to install an icelink 500. My cd changer is stuck and will not move, what am i doing wrong. I have the keys. Anyone know how to remove the vents instead?
#18
![Default](https://www.audiworld.com/forums/images/icons/icon1.gif)
hi
I'd like to know how did you check with a voltmeter to make shure that a slot is 12V ?
Did you checked with the fuse in place or not ?
Sorry but I'm a little confused about this passage
thanks in advance
I'd like to know how did you check with a voltmeter to make shure that a slot is 12V ?
Did you checked with the fuse in place or not ?
Sorry but I'm a little confused about this passage
thanks in advance