coupegt87

Hi Leon,

What if I have the Kuftec cables and it has 4 wires with hooks ?

1) question, the 4 wires coming out of the cables have number on them Pin 1, Pin 16, Pin6, Pin 6, do I plug this into the J519 module or can I wire this to another source ? Thank you for any inputs...

B. regards,

Mark

xlr8it

2 wires (C 6 and C 16) have to be wired into the J519 you do not have to connect the other two

then code the 09 module to xenon headlights W/O washers

coupegt87

Hi Leon,

Thank you Very Much for your expertise, one more thing, if I have a 2012 model is the recode the same ( 0015121 ) ?

Kc Taylor

what code did you use after the install ?

Kc Taylor

hey i did everything you told me to do but now the led come on as a daytime running light and when the sun go down the hid kick in and led go off. is it a way that i can have both on at the same time ?

xlr8it

they should not turn off with the headlights on. If i had to guess I would say you have used the wrong earth wire it must be going positive when the HIDs are on, find a permanent earth wire for the LEDs.

Kc Taylor

ok. where i find the earth wire at and once i find it what i do next ?

Kc Taylor

would the earth wire be the ground wire ?

xlr8it

yes ground wire

Kc Taylor

ok but will that stop the led to come on at night? because the led is running like a daytime running light right then at night it go off.