Originally Posted by VipinLJ

+1. That's how it is in all cars. So as not to blind the driver in the car coming from the opposite direction.

Originally Posted by Eppieguy

I forgot, what I do remember is that I had them on up against my garage wall and I saw I was turning the wrong way so I went back to where they were aligned and turned 1 full turn the other way. Basically you can't screw this up as long as you're watching them on a wall at a distance of about 15-20'.

Originally Posted by RickObe

Just did mine. Counter-clockwise to raise them. Takes a 6mm hex wrench.

Originally Posted by Bozman5000

Cool, that's helpful. Did you make note regarding the number or turns you did? I've seen 1 and 2 full turns mentioned.

Originally Posted by 1stq7

Found it.

Thank you

Originally Posted by DKV

Can you post a better picture? Did you have to remove any of the plastic covers?

Thanks

Originally Posted by SYMAWD

IIHS would agree rating them Poor and only Marginal when equipped with high beam assist. I find that most Audi models have their headlights aimed low.

Originally Posted by RickObe

I tweaked the contrast on 1stq7's photo so you can see it better. Both sides look the same on my Q7. No covers need to be removed. 6mm hex key goes in the slot that sits just forward of the raised rectangular area in the plastic panel.

Originally Posted by DKV

Thanks Rick. Much appreciated. You said you went counter-clockwise?

Originally Posted by RickObe

Post #22