VCDS mods on 2017 Q7
#142
#144
AudiWorld Member
for enabling automatic PDC...what is the hex value of byte 37... I went to enable it and bit 1 was checked already but the parking sensors aren't activating automatically.....
#146
AudiWorld Senior Member
I successfully activated High Beam assist on my Premium Plus B9 A4 with no driver assist features, confirming all the camera functions are available on every model.
I did so on OBDEleven via Modules A5 and 09, BUT this function needs to be accessed and turned on in the MMI before it can function. None of the current coding solutions have access to the MMI checkbox that I could find so I took the coding from a Q7 with driver assist (courtesy of RickObe, thank you!) in this VCDS thread and put it into my car (noting my previous coding) and it made the option pop up already checked, it also threw up a lot of fault codes. So I just put my original coding back in and it kept the auto high beam assist on, that is when I made the coding changes and had a chance to test it tonight and it works flawlessly!
I'm assuming that it is like the Active Lane Assist retrofits where it just needs to be turned on once to activate. Here is the coding, note that I had tried the coding before I had entered the Q7 coding and it did not work (and once I reverted back to mine the option was gone from MMI but function still worked).
09 - Central Electrics
Coding->high_beam_functions->high-beam assistant
A5 - Front Camera Driver Assist ->High-Beam_Assist->Active
Im really close to enabling Traffic Sign Recognition and then will get Active Lane Assist hopefully!
I did so on OBDEleven via Modules A5 and 09, BUT this function needs to be accessed and turned on in the MMI before it can function. None of the current coding solutions have access to the MMI checkbox that I could find so I took the coding from a Q7 with driver assist (courtesy of RickObe, thank you!) in this VCDS thread and put it into my car (noting my previous coding) and it made the option pop up already checked, it also threw up a lot of fault codes. So I just put my original coding back in and it kept the auto high beam assist on, that is when I made the coding changes and had a chance to test it tonight and it works flawlessly!
I'm assuming that it is like the Active Lane Assist retrofits where it just needs to be turned on once to activate. Here is the coding, note that I had tried the coding before I had entered the Q7 coding and it did not work (and once I reverted back to mine the option was gone from MMI but function still worked).
09 - Central Electrics
Coding->high_beam_functions->high-beam assistant
A5 - Front Camera Driver Assist ->High-Beam_Assist->Active
Im really close to enabling Traffic Sign Recognition and then will get Active Lane Assist hopefully!
#147
Audiworld Junior Member
Join Date: Aug 2016
Location: Southern California
Posts: 43
Likes: 0
Received 0 Likes
on
0 Posts
I am interested in shutting off that annoying start stop, is this the procedure you followed
- module 09-Cent. Elec.
- enter Security Code (shown up by default) (mine i 20113)
- Adaptation, Type Channel 34 and hit Read button, it should show the factory default number.
subtract 4 to the value --> Start&Stop always disabled
add 32 to the value --> remember last status
- test & save
- module 09-Cent. Elec.
- enter Security Code (shown up by default) (mine i 20113)
- Adaptation, Type Channel 34 and hit Read button, it should show the factory default number.
subtract 4 to the value --> Start&Stop always disabled
add 32 to the value --> remember last status
- test & save
09 Central Electics
Adaptation
Deactivation of start-stop function (change from "not active" to "active")
After making the change, the engine still performs start-stop. Has anyone figured out how to get rid of start-stop? I looked through this thread and the OBDeleven thread but can't find a solution. Any help will be appreciated.