LPS74

Stock turbo and cat out with new motor mount. Starter wires covered with heat shield tape.
<img src="http://pictureposter.audiworld.com/38067/pc290033.jpg">
<img src="http://pictureposter.audiworld.com/38067/pc290034.jpg">
Stock exhaust mani with old gasket used as a template for gasket matching. Kit comes with new mani and cat to dp gaskets.
<img src="http://pictureposter.audiworld.com/38067/pc290036.jpg">
close up of one of the four ports.
<img src="http://pictureposter.audiworld.com/38067/pc290041.jpg">
Here's the finished product.
<img src="http://pictureposter.audiworld.com/38067/pc290052.jpg">
close up of gasket matched ports. Pics of the turbo side was blurry but it was also matched.
<img src="http://pictureposter.audiworld.com/38067/pc290042.jpg">
<img src="http://pictureposter.audiworld.com/38067/pc290043.jpg">
Pre assembly of gt28r, exhaust mani, and high flow cat with oil/coolant lines.
<img src="http://pictureposter.audiworld.com/38067/pc290050.jpg">
<img src="http://pictureposter.audiworld.com/38067/pc290058.jpg">
<img src="http://pictureposter.audiworld.com/38067/pc290059.jpg">
<img src="http://pictureposter.audiworld.com/38067/pc290060.jpg">
<img src="http://pictureposter.audiworld.com/38067/pc290061.jpg">
John @ AWE was nice enough to give mr the ITG panel filter instead of the free pedal set:-D
<img src="http://pictureposter.audiworld.com/38067/pc290062.jpg">

So far so good, just some minor adjustments of the DP rattling against the cross member.

GollyGwagen (Chuck)

Nice! Damn, when does Bandimere open again? ;-)

TANMAN

I want one.

green_vaccine_old

I bet that made quite a difference

wagongotya

awesome!

EBG 18T [Eric]

i will be interested to see how it runs once you get to denver.

ar design

not for a while. so lame.