sparkhill

Pick up a set of these

<img src="http://i308.photobucket.com/albums/kk349/scottparkhill/PorscheTitanium.jpg">
<img src="http://i308.photobucket.com/albums/kk349/scottparkhill/lugs.jpg">

Now all are engraved "POGGIPOLINI TITANIUM".

Bob W.

cone seat bolts on ball seat wheels could be really bad. best case scenario, you'll ruin the wheels. worst case, a wheel falls off while you're driving.

scott61

Scott,
You will need Conical Lug Bolts 14x1.50x27mm on your RS4 Monoblok Wheels
Best Regards,



Vince Borja, Parts &amp; Service

HRE Performance Wheels

2611 Commerce Way, Suite D.

Vista, CA 92081

scott61

HRE Now sending me out the correct ones no charge

sparkhill

I was told by HRE that <u>all</u> HRE Monoblocks used the ball seat lugs but maybe they meant all of the P-series monoblocks (but not the M-series monoblocks) use the ball-seat lugs. Regardless, use what they send you and re-torque them frequently the first couple of days to make sure they are staying put.

RS4 RAIDER

HRE Made A Mistake. Should Have Been Ball, But They Made Them Cone

star607

but the wheel shop I had them put on at replaced the lugs for me.

scott61

At least HRE is stepping up and sending us out bolts at no charge. still a little concerned since they are sending out 27mm length. I know my stocks that are 27mm were far to short. Do you know the length you used?

Mirror|rorriM

You can see if the lands look conical or spherical. You can also feel it with a finger.

scott61

I would think that also, I had installed at high quality performance shop that does mostly Audi's and Porsche. The first technician stood there looking at it and rubbing his finger in it trying to tell, He then called over the manager and he also could not tell. Thats when they called Wheels Boutique to check and were told ball, which we now know is wrong. Still a bit concerned about this, Since they admit they made wrong in the first place I wonder if I have some sort of hybrid between the cone/ball