HyperShift installed...
06-13-2006, 08:25 AM
#1
Former Vendor
Thread Starter
Join Date: Mar 2000
Posts: 3,759
Likes: 0
Received 0 Likes
on
0 Posts
HyperShift installed...
<center><img src="http://www.stratmosphere.com/strb6s4a430short_585.jpg"></center><p>Just installed a new HyperShift short shifter in the car. Reduces the fore/aft distance by 1". OEM is around 4.25" from 1st to 2nd. I have to say, the shifter now matches the character of the car. -Pete, Stratmosphere. 1.866.533.1777<ul><li><a href="http://www.stratmosphere.com/hypershift_short_shifters3.htm">HyperShift for the B7 RS 4</a></li></ul>
06-13-2006, 10:18 AM
#3
AudiWorld Super User
almost identical installation to the strat B5 S4 shifter huh?
so maybe it'll only take my mechanically-non-inclined self 2 hours to do instead of 4 
after I drop a few pieces inside and try to retrieve them that is... in retrospect I guess it wasn't too hard of an install but doing it in the B5 was still a huge pita for me.
after I drop a few pieces inside and try to retrieve them that is... in retrospect I guess it wasn't too hard of an install but doing it in the B5 was still a huge pita for me.
06-13-2006, 10:52 AM
#6
Former Vendor
Thread Starter
Join Date: Mar 2000
Posts: 3,759
Likes: 0
Received 0 Likes
on
0 Posts
The B5 is a totally different animal actually. B6/B7 A4/S4/RS 4 similar...
but I could see some products not installing smooth in the RS 4. Mine right now is butta! -Pete
Trending Topics
06-13-2006, 11:26 AM
#9
Former Vendor
Thread Starter
Join Date: Mar 2000
Posts: 3,759
Likes: 0
Received 0 Likes
on
0 Posts
It's on full. The new B7 S4 and RS 4 have...
a new component stock that makes them a touch shorter OEM. I guess they stole our design! But...they didn't make an extreme change so there is still a 1" reduction is distance, which is *very* nice. And the bearings in there along with the B6/B7 transmission make it all so nice. -Pete
