Questions about V1 hardwire
10-06-2008, 09:28 PM
#12
New Member
Thread Starter
Join Date: Sep 2005
Posts: 18
Likes: 0
Received 0 Likes
on
0 Posts
Thanks. Does the original fuse go into the top slot (where the...
red tap wire connects) or the other slot? Also, can you confirm you installed the kit with the fuses facing towards the ground (so that the red connect wire points reward)?
10-07-2008, 03:19 AM
#13
Guest
Join Date: Aug 2000
Location: Fayetteville, NC
Posts: 4,795
Likes: 0
Received 0 Likes
on
0 Posts
Orientation is hit or miss depending on design.
The slot with the wire coming out is the one where the V1 connects. and the other is for what ever the slot was intended for.
I used a volt meter to make sure the blade with the tap wire coming out was actually using the fuse in the tap and not just stabbed into the hot side bypassing the fuse all together.
If memory serves me correct when installed the fuses pointed down.
I used a volt meter to make sure the blade with the tap wire coming out was actually using the fuse in the tap and not just stabbed into the hot side bypassing the fuse all together.
If memory serves me correct when installed the fuses pointed down.
Thread
Thread Starter
Forum
Replies
Last Post
OneThirtyEight
A4 (B5 Platform) Discussion
5
05-18-2004 01:27 PM
the senator
A4 (B6 Platform) Discussion
4
04-28-2003 07:16 AM
treminga@execpc.com
TT (Mk1) Discussion
2
08-10-2000 03:58 AM
