twin turbo v8 s4 b6
#1
Audiworld Junior Member
Thread Starter
Join Date: Oct 2007
Posts: 40
Likes: 0
Received 0 Likes
on
0 Posts
twin turbo v8 s4 b6
I was just wondering if anyone knows someone or has done this before i am just about done getting all the parts together to make this twin turbo kit possible but i am trying to decide if i should rear mount the turbos or put them right under the header? they are a balistics t3/t04e turbos so i am going to be tight for room!
#3
Audiworld Junior Member
Thread Starter
Join Date: Oct 2007
Posts: 40
Likes: 0
Received 0 Likes
on
0 Posts
Re: Wow, crazy. What other parts do you already have?
well i have already done everything suspension and have the ecs stage 5 brakes and labree header back exhaust which i will have to change depending on were i put the turbos. but i also have the oil stuff like a sandwitch plate and lines and fitings. i also have all the piping i will ever need and some of the fittings for that. and a 22"x11"x3" intercooler with 2 inlets and 2 out. i still need a few things! lol
#5
Audiworld Junior Member
Thread Starter
Join Date: Oct 2007
Posts: 40
Likes: 0
Received 0 Likes
on
0 Posts
Re: If you feel comfortable mounting underneath....go for it, otherwise protect you investment...
ya i was thinking that would be the best way. i have seen a few of those STS turbo kits and it seems like there is 2 much that could get hit lol
#6
You just have to be careful....that's all, there is no single best way to do it...
...if you are cramped for space, then mount them underneath.
Over the summer I saw a 90 coupe with a 3.6 L V8...twin setup...it fit. Watch out for road kill and pot-holes...you should be fine.
Over the summer I saw a 90 coupe with a 3.6 L V8...twin setup...it fit. Watch out for road kill and pot-holes...you should be fine.
#7
You will need to take mounting location into account when selecting the turbo...
the rear mount turbos will have to be sized much different then those mounted to the manifold. What are you doing for fueling and programming out of curiousity? What parts do you have together thus far?
Trending Topics
#9
Good Luck..I hope it comes out better than this ...:)
Look at the location of the Turbos
<a href="http://photobucket.com" target="_blank"><img src="http://i220.photobucket.com/albums/dd20/lionfjudah/S4V8engine.jpg" border="0" alt="Photo Sharing and Video Hosting at Photobucket"></a>
<a href="http://photobucket.com" target="_blank"><img src="http://i220.photobucket.com/albums/dd20/lionfjudah/s4v8.jpg" border="0" alt="Photo Sharing and Video Hosting at Photobucket"></a>
I am sure all you guys have seen this before....always nice to see it again....
Cheers
<a href="http://photobucket.com" target="_blank"><img src="http://i220.photobucket.com/albums/dd20/lionfjudah/S4V8engine.jpg" border="0" alt="Photo Sharing and Video Hosting at Photobucket"></a>
<a href="http://photobucket.com" target="_blank"><img src="http://i220.photobucket.com/albums/dd20/lionfjudah/s4v8.jpg" border="0" alt="Photo Sharing and Video Hosting at Photobucket"></a>
I am sure all you guys have seen this before....always nice to see it again....
Cheers
#10
I'd love to show up at my local Audi dealer for service.....
...with that motor stuffed into a stock looking S4 and tell the service writer:
"It makes a loud roar when I step on the gas hard, and the tachometer needle keeps bouncing off the red zone before I can shift gears. Can you fix it under warranty please? Oh, and I need the wiper blades replaced."
Great looking motor!
Bruce
"It makes a loud roar when I step on the gas hard, and the tachometer needle keeps bouncing off the red zone before I can shift gears. Can you fix it under warranty please? Oh, and I need the wiper blades replaced."
Great looking motor!
Bruce