made my own clear reflectors for my B8 S4. DIY
#1
![Default](https://www.audiworld.com/forums/images/icons/icon1.gif)
just FYI. this is not a very cost effective solution but if anyone wants a set when i finalize this.. shoot me a PM on AZ or here.
I was going to made an acutaly injection mold since i am in the plstic industry sorta but found that the tooling is very expensive and not worth the money at all. so i decided to use silicon mold and non yellowing clear cast resin.
came out ok but still need to figure out how to remove all the bubble without using a vacuum chamber
![](http://www.audizine.com/classifieds/data/121/IMG_84771.JPG)
*update*
![](http://www.xerovariance.com/ul_images/mold.jpg)
![](http://www.xerovariance.com/ul_images/photo1.jpg)
![](http://www.xerovariance.com/ul_images/photo2.jpg)
![](http://www.xerovariance.com/ul_images/photo3.jpg)
![](http://www.xerovariance.com/ul_images/photo4.jpg)
![](http://www.xerovariance.com/ul_images/photo5.jpg)
I was going to made an acutaly injection mold since i am in the plstic industry sorta but found that the tooling is very expensive and not worth the money at all. so i decided to use silicon mold and non yellowing clear cast resin.
came out ok but still need to figure out how to remove all the bubble without using a vacuum chamber
*update*
![](http://www.xerovariance.com/ul_images/mold.jpg)
![](http://www.xerovariance.com/ul_images/photo1.jpg)
![](http://www.xerovariance.com/ul_images/photo2.jpg)
![](http://www.xerovariance.com/ul_images/photo3.jpg)
![](http://www.xerovariance.com/ul_images/photo4.jpg)
![](http://www.xerovariance.com/ul_images/photo5.jpg)
![](http://www.xerovariance.com/ul_images/photo6.jpg)
Thread
Thread Starter
Forum
Replies
Last Post
Basttion
TT (Mk1) Discussion
1
05-24-2005 03:02 AM
NvFlw
TT (Mk1) Discussion
0
10-17-2004 06:22 PM
channelv
A4 (B5 Platform) Discussion
0
12-21-2001 10:04 AM