So this is the interior we are getting then?
#1
Audiworld Junior Member
Thread Starter
Join Date: Mar 2009
Posts: 39
Likes: 0
Received 0 Likes
on
0 Posts
So this is the interior we are getting then?
According to 2013 S4 order guide three-spoke flat bottomed steering wheel is standard and stainless steel mesh inlays with piano black center console and instrumentpanel surround is option 5MZ.
If so thank you lord for answering my prayers
If so thank you lord for answering my prayers
#3
AudiWorld Senior Member
Join Date: Jan 2012
Location: Detroit Metro Area
Posts: 623
Likes: 0
Received 0 Likes
on
0 Posts
In the US yes it's possible to get that. In Canada no. The Canadian order guide doesn't have the stainless steel mesh inlays as an option.
#4
Audiworld Junior Member
Join Date: Aug 2009
Location: New England
Posts: 74
Likes: 0
Received 0 Likes
on
0 Posts
Like Stereodude said, you can only get the piano black gauge surround if you get the stainless steel inlay option. Will be interesting to see if that piece can be retrofitted to the earlier cars. The gauge cluster shape looks slightly different, so not sure.
#5
Banned
Now here is where it gets interesting. Since there is now a piano black instrument panel trim in US models, you can just go to you local Audi dealer and order the piano black trim part and replace the silver, instead of have yours painted like I did. You could even have the Audi tech do the replacement if you don't want to fool with it yourself. Probably not cost effective.
Trending Topics
#8
Audiworld Junior Member
Join Date: Aug 2009
Location: New England
Posts: 74
Likes: 0
Received 0 Likes
on
0 Posts
The piece behind it that it snaps into looks to be the same part according to ETKA. So it should fit that part, but the cluster might be slightly different due to the surround being a single piece. Won't be cheap either, I looked up the part number on ECS's website and it was $602.
#10
AudiWorld Senior Member
Join Date: Jan 2012
Location: Detroit Metro Area
Posts: 623
Likes: 0
Received 0 Likes
on
0 Posts
I'd like the cluster / MMI display surround piece to be piano black, but CF everywhere else. I definitely don't want a piano black piece around the shifter / MMI controls where it will get scratches somewhat easily from abrasion.
Last edited by Stereodude; 04-09-2012 at 08:27 AM.