Advice needed: New clutch with a chipped puck, what to do?
#1
AudiWorld Senior Member
Thread Starter
Join Date: Jun 2002
Posts: 1,719
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://www.audiworld.com/forums/images/icons/icon1.gif)
I've had a Clutchmasters stage 4 clutch waiting for install for a while now. Its been sitting in a box with the clutch plate "seran-wrapped" to the pressure plate, just like it shipped.
I took it out for show and tell today and LI-S4 noticed that a bolt on the pressure plate had chipped off a piece of the clutch material thats bolted to the clutch plate.
<img src="http://pictureposter.audiworld.com/39123/chipped_clutch_material.jpg">
This picture was taken edge on with everything still wrapped together. If I clean up the corner a bit will I be ok? Or would installing this be a recipe for disaster?
Thanks guys!
I took it out for show and tell today and LI-S4 noticed that a bolt on the pressure plate had chipped off a piece of the clutch material thats bolted to the clutch plate.
<img src="http://pictureposter.audiworld.com/39123/chipped_clutch_material.jpg">
This picture was taken edge on with everything still wrapped together. If I clean up the corner a bit will I be ok? Or would installing this be a recipe for disaster?
Thanks guys!
Thread
Thread Starter
Forum
Replies
Last Post
Neo1130
A4 (B5 Platform) Discussion
2
01-10-2007 04:21 PM
BoneStockS4
S4 / RS4 (B5 Platform) Discussion
5
03-20-2005 03:30 PM
OCquattro
A4 (B5 Platform) Discussion
5
11-17-2004 12:40 PM
sozdemir
A4 (B5 Platform) Discussion
3
05-24-2004 02:32 PM