Anyone attempted any Lemmiwinks on MTM stg1chip on a stg2+ ?
01-04-2006, 11:21 PM
#5
AudiWorld Senior Member
Join Date: Feb 2002
Posts: 1,068
Likes: 0
Received 0 Likes
on
0 Posts
Just did some Stage 3- tweaks(using MTM stage 2 software) with K04s
TCD, MBC, and Piggie "5 bar" FPR. The FPR is probably not exactly 5 bar but since tuning is needed anyway one can make good use of it.
The problem I encountered tonight was the requested boost dropped below the TCD threshold so boost started tapering(N75 in parallel regained control) around 5k rpm. This lead to a FATS time of 4.8 with my boost tapering to 10psi by the time I was at 6.5k rpm. There's much more potential that I'm not seeing.
I think I'm going to contact Piggie to see if there is a different diode that might solve my problems.
The problem I encountered tonight was the requested boost dropped below the TCD threshold so boost started tapering(N75 in parallel regained control) around 5k rpm. This lead to a FATS time of 4.8 with my boost tapering to 10psi by the time I was at 6.5k rpm. There's much more potential that I'm not seeing.
I think I'm going to contact Piggie to see if there is a different diode that might solve my problems.
01-05-2006, 11:05 AM
#6
AudiWorld Senior Member
Join Date: Oct 2002
Posts: 1,361
Likes: 0
Received 0 Likes
on
0 Posts
All MTM chips starting 2001 should have adaptation channels open for fine tuning
after proper softcoding. I did it on my S4 and A4 and it helped in both cases qiute a bit. Never did lemmiwinks.
Thread
Thread Starter
Forum
Replies
Last Post
PSmalls::DoggieStyle
S4 / RS4 (B5 Platform) Discussion
18
04-19-2004 01:28 PM
anonymouS4
S4 / RS4 (B5 Platform) Discussion
15
07-09-2001 11:04 AM
DarinS4Turbo
S4 / RS4 (B5 Platform) Discussion
4
05-01-2001 11:13 PM
