Anyone have ECUx running with a HEX-COM/CAN Ross-Tech cable and version 805?
#1
AudiWorld Senior Member
Thread Starter
Join Date: Sep 2006
Location: Toronto, Canada
Posts: 819
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://www.audiworld.com/forums/images/icons/icon1.gif)
I can't for the life of me get the cable to work with ECUx.
I have a HEX+CAN serial cable that was updated with the latest firmware from VAG-COM (VCDS, whatever) 805.
It communicates perfectly in VAG-COM and ASP's SpeedSWITCH program through COM1.
With ECUx, nothing I do can make it work. It always comes back with a communication error. I've tried different baud rates, and different methods of connecting (standard, accurate, uart).
I'm going crazy here. Is it just an incompatibility with the newer firmware in the HEX+CAN cable?
I have a HEX+CAN serial cable that was updated with the latest firmware from VAG-COM (VCDS, whatever) 805.
It communicates perfectly in VAG-COM and ASP's SpeedSWITCH program through COM1.
With ECUx, nothing I do can make it work. It always comes back with a communication error. I've tried different baud rates, and different methods of connecting (standard, accurate, uart).
I'm going crazy here. Is it just an incompatibility with the newer firmware in the HEX+CAN cable?
#3
AudiWorld Senior Member
Thread Starter
Join Date: Sep 2006
Location: Toronto, Canada
Posts: 819
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://www.audiworld.com/forums/images/icons/icon1.gif)
And I just spoke to Andy at Ross-Tech: there's no downgrading.
![Frown](https://www.audiworld.com/forums/images/smilies/frown.gif)
Thread
Thread Starter
Forum
Replies
Last Post
Rican_S4
S4 / RS4 (B5 Platform) Discussion
4
12-12-2006 07:20 AM
Alright, I cant get the ECUx to work for the life of me.... Here is my setup, jprice please chime in
M3=Lunnch
S4 / RS4 (B5 Platform) Discussion
10
07-15-2006 09:09 PM