Did some measuremens on the built-in BOSE EQ...
#1
AudiWorld Super User
Thread Starter
Did some measuremens on the built-in BOSE EQ...
I'm about ready to start on the stereo and thought I'd do some measurements on the effect of the built-in EQ.
The frequency response graphs were taken at the wiring harness of the amplifier input, with the harness unplugged. Tone controls are set flat.
Ignore the ripples below 500 Hz. These are just the result of the measurement equipment settings.
The filename of the photo describes the EQ setting.<ul><li><a href="http://y42.photos.yahoo.com/maxhawkgt">Click here for frequency response graphs.</a></li></ul>
The frequency response graphs were taken at the wiring harness of the amplifier input, with the harness unplugged. Tone controls are set flat.
Ignore the ripples below 500 Hz. These are just the result of the measurement equipment settings.
The filename of the photo describes the EQ setting.<ul><li><a href="http://y42.photos.yahoo.com/maxhawkgt">Click here for frequency response graphs.</a></li></ul>
Thread
Thread Starter
Forum
Replies
Last Post
MikeNSX
A8 / S8 (D3 Platform) Discussion
1
09-13-2009 02:53 PM
AaronG79
A4 (B6 Platform) Discussion
13
11-18-2003 07:01 PM
rexism
S4 / RS4 (B5 Platform) Discussion
11
01-23-2002 12:46 PM