DON'T BUY A GREEDSPEED SNUB MOUNT
03-18-2007, 12:04 PM
#13
AudiWorld Super User
Thread Starter
Join Date: Jun 2003
Posts: 4,644
Likes: 0
Received 0 Likes
on
0 Posts
That's funny - See if you hear a clunk when getting off the throttle
Abruptly in 1/2 gears under 3k rpm - that's when mine would hit even after centering etc. All gone with no mount, and APR never did that so I'm putting it back on when my new bracket gets here Tuesday.
03-18-2007, 12:23 PM
#17
AudiWorld Super User
Thread Starter
Join Date: Jun 2003
Posts: 4,644
Likes: 0
Received 0 Likes
on
0 Posts
It does - DIMENSION comparison of APR vs GREEDSPEED inside
APR Diameter: 2.75''
Greedspeed Diamater: 2.5''
APR Height: 2.0''
Greedspeed Height: 1.5''
APR Material: Firm Rubber
Greedspeed Material: Furm Polyurethane
The Greedspeed is much firmer than the APR. I would have to recommend the APR snub mount based on my experiences. I'm going back to it.
Greedspeed Diamater: 2.5''
APR Height: 2.0''
Greedspeed Height: 1.5''
APR Material: Firm Rubber
Greedspeed Material: Furm Polyurethane
The Greedspeed is much firmer than the APR. I would have to recommend the APR snub mount based on my experiences. I'm going back to it.
03-18-2007, 12:28 PM
#18
New Member
Join Date: Dec 2006
Posts: 59
Likes: 0
Received 0 Likes
on
0 Posts
034 mount and cup
<center><img src="http://www.034motorsport.com/images/thumbs/thumb-A4_1.8T_SNUBBRACKET_100_98.JPG"></center><p>looks like someone made a better fitting holder
seems like same old hard poly mount.been around for decades.says for 1.8t?
seems like same old hard poly mount.been around for decades.says for 1.8t?
03-18-2007, 12:29 PM
#19
AudiWorld Senior Member
Join Date: Aug 2004
Posts: 1,270
Likes: 0
Received 0 Likes
on
0 Posts
I like stock mounts with the AWE DTS. Put it this way - my stock mounts haven't broken yet and
I've got 30k on with stage 3. So far so good. A friend of mine also has a stiff front mount ang gets that clunk.
