Followup: Best way to 'patch' the stock box?
#1
AudiWorld Super User
Thread Starter
![Default](https://www.audiworld.com/forums/images/icons/icon1.gif)
What's the best way to plug the darintake and you guys still consider the data valid?
The fix would need to be permanent b/c I'm looking to do long term testing as well so it needs to be water/heat proof. The hole will need to be cut out again when testing is complete.
Ideas?
The fix would need to be permanent b/c I'm looking to do long term testing as well so it needs to be water/heat proof. The hole will need to be cut out again when testing is complete.
Ideas?
#4
![Default](https://www.audiworld.com/forums/images/icons/icon1.gif)
Clean both sides of the airbox and put tape on each side. It'll hold up. And you can peel it off when you are done testing.
Out of curiosity, what are you testing and why?
-Dave Pramanik
Out of curiosity, what are you testing and why?
-Dave Pramanik
#7
![Default](https://www.audiworld.com/forums/images/icons/icon1.gif)
and depending on the filter you may see further gains.
Not sure why you would rehash this, several of us, tested this to death
Not sure why you would rehash this, several of us, tested this to death
Trending Topics
#9
AudiWorld Super User
Thread Starter
![Default](https://www.audiworld.com/forums/images/icons/icon1.gif)
and I'm wondering what kind of long/short term data I will get from running an unmodded box. I'm interested to see idle/max g's, air/fuel, hp/torque gains, or practically anything else I can think of.
I guess I'm just looking to start a new project.
I guess I'm just looking to start a new project.