S4 / RS4 (B5 Platform) Discussion Discussion forum for the B5 Audi S4 & RS4 produced from 1998-2002

Having some problems with rubbing (and tire shredding) 235 45 18 GSD3's on 18" BBS CH

Thread Tools
 
Search this Thread
 
Old 05-26-2007, 02:37 PM
  #1  
AudiWorld Super User
Thread Starter
 
Bruno_S4's Avatar
 
Join Date: Oct 2001
Posts: 5,139
Likes: 0
Received 0 Likes on 0 Posts
Default Having some problems with rubbing (and tire shredding) 235 45 18 GSD3's on 18" BBS CH

Well I had a set of Stasis Tracksports installed a couple of months back while I was on stock 17's. I swapped to my summer set up and had no real problems until the last couple of days.... for some reason my front passenger wheel has been rubbing like crazy over the smallest bumps and dips in the road. The shock feels firm on the car so I don't think it's blown or anything... So I am going to be raising the car to 25 1/2 all around and see what happens. Remember I am running 235's?

My ride height is:

25 5/16 drivers front
25 5/16 drivers rear
25 1/8 pass front
25 7/16 pass rear

My question is have I done really bad damage to the tire? Quite a bit of shavings have come off the corner of the tire as you can see in the pictures.

<img src="http://i105.photobucket.com/albums/m231/BrunoS4/Tracksports007.jpg">

<img src="http://i105.photobucket.com/albums/m231/BrunoS4/Tracksports008.jpg">

<img src="http://i105.photobucket.com/albums/m231/BrunoS4/Tracksports010.jpg">

<img src="http://i105.photobucket.com/albums/m231/BrunoS4/Tracksports011.jpg">
Old 05-26-2007, 02:45 PM
  #2  
Rest In Peace
 
Jeff Vader - boscoj's Avatar
 
Join Date: Feb 2001
Posts: 25,366
Likes: 0
Received 0 Likes on 0 Posts
Default doesn't look that bad, did you take the fender liner screw out at the top of the fender?

looks like you did and the tab that holds it has now bent down and is cutting the tire.

Bend that baby back up and raise the whole car a few 1/8ths . . .
Old 05-26-2007, 02:53 PM
  #3  
AudiWorld Super User
 
MarkFank's Avatar
 
Join Date: Mar 2000
Posts: 13,306
Likes: 0
Received 5 Likes on 2 Posts
Default 235 45 18s? Those are WAY too tall. You should be running 235/40-18s but those still may rub

depending on height and if fenders are rolled. I am running 245/35-18 with no rubbing. The width isn't the problem, it's the height.
Old 05-26-2007, 02:55 PM
  #4  
AudiWorld Super User
 
lemieux@curbside's Avatar
 
Join Date: Dec 2002
Posts: 17,772
Likes: 0
Received 0 Likes on 0 Posts
Default

no big deal ...roll the ffender .
Old 05-26-2007, 03:26 PM
  #5  
AudiWorld Super User
 
HdiaS4's Avatar
 
Join Date: Feb 2004
Posts: 2,976
Likes: 0
Received 0 Likes on 0 Posts
Default

i heart eagle f1.
Old 05-26-2007, 04:18 PM
  #6  
AudiWorld Super User
Thread Starter
 
Bruno_S4's Avatar
 
Join Date: Oct 2001
Posts: 5,139
Likes: 0
Received 0 Likes on 0 Posts
Default

Yes I took that out and it's not from the screw. It's from the plastic fender liner itself
Old 05-26-2007, 05:20 PM
  #7  
Rest In Peace
 
Jeff Vader - boscoj's Avatar
 
Join Date: Feb 2001
Posts: 25,366
Likes: 0
Received 0 Likes on 0 Posts
Default

It's from the fender (steel) tab, bend it up or roll your fenders . . . that's what's slicing it up
Old 05-26-2007, 05:59 PM
  #8  
New Member
 
c_reber's Avatar
 
Join Date: Sep 2002
Posts: 185
Likes: 0
Received 0 Likes on 0 Posts
Default

I hate the price! Hopefully you don't need a new one Bruno =$$$
Old 05-26-2007, 06:56 PM
  #9  
AudiWorld Super User
 
eigenvector's Avatar
 
Join Date: Jan 2006
Posts: 2,008
Likes: 0
Received 0 Likes on 0 Posts
Default

2nd 45 is way to tall go 35
Old 05-26-2007, 08:05 PM
  #10  
AudiWorld Super User
 
Ah10@WMS's Avatar
 
Join Date: Aug 2000
Posts: 7,608
Likes: 0
Received 0 Likes on 0 Posts
Default

Ouch


Quick Reply: Having some problems with rubbing (and tire shredding) 235 45 18 GSD3's on 18" BBS CH



All times are GMT -8. The time now is 02:38 AM.