Here a new one...what do you have..and how much have you spend on automotive tools?
#1
AudiWorld Senior Member
Thread Starter
Join Date: Mar 2000
Posts: 4,527
Likes: 0
Received 0 Likes
on
0 Posts
Here a new one...what do you have..and how much have you spend on automotive tools?
I have four boxes...about 4 torque wrenches (2 broken)...two laydown undercar sleds....two seats....harbor freight brake tool kit...mobile canopy...three hydraulic jacks (one not that safe)...four jack stands...and tons of craftsman tools..including a Makita drill/driver(quick wheel changes)..OH..and the "persuader" the lovely pry device that helps with suspension installs.
About to buy an air compressor, air gun, hoses.
How about you?
About to buy an air compressor, air gun, hoses.
How about you?
#3
hmmm...
Metric combo wrenches: 8mm -> 32mm
Metric short sockets 3/8 drive: 9mm -> 22mm
Metric deep sockets 3/8 drive: 9mm -> 19mm
Metric impact socket set 1/2" (sears)
Metric offset ratchet wrench set
10" adjustable wrench
18" adjustable wrench
1 1/4" ratchet
2 3/8" ratchet
1 1/2" ratchet
1 SnapOn 18" 1/2" breaker bar
3 straight extension, 3 wobbly extension
Imperial Allen Key set
Metric wobbly end Allen Key Set (long)
Imperial "T" handle allen key set
Metric "T" handle allen key set
3/8" Torx socket set
3/8" Metric Allen socket set
Security Torx set (snap-in)
Normal dykes
Flat top dykes
The tool you use for "C" clips
Dead blow hammer
Drift set
Punch set
assorted screwdrivers (like 8 or so)
Snap On 14.4v Impact Gun
OEM Rear brake tool
Motive bleeder w/ bottle
1 aluminum (HF) floor jack
1 sears floor jack
4 AC 3000N jack stands
2 Sears jack stands
1 Sears spring compressor kit
1 Sears fluid pump
1 8gallon fluid container
5 fluid funnels
2 steel wheel chocks
1 1/2" torque wrench (foot pound)
1 3/8" torque wrench (inch pound)
1 Longacre leak down tester
1 Dremmel kit (used mostly for automotive)
1 SnapOn 4 drawer box (pic when new, does NOT still look like that)
<img src="http://www.boom.net/~ryans4/random/SnapOn/3.jpg">
I think that's most of it.
Coming soon...
Gear Wrench 7pc Metric Stubby set
Gear Wrench 7pc Flex Head Metric set
Vice Grip 10pc Plier set
Crafstman 5pc Pry Bar set
Metric short sockets 3/8 drive: 9mm -> 22mm
Metric deep sockets 3/8 drive: 9mm -> 19mm
Metric impact socket set 1/2" (sears)
Metric offset ratchet wrench set
10" adjustable wrench
18" adjustable wrench
1 1/4" ratchet
2 3/8" ratchet
1 1/2" ratchet
1 SnapOn 18" 1/2" breaker bar
3 straight extension, 3 wobbly extension
Imperial Allen Key set
Metric wobbly end Allen Key Set (long)
Imperial "T" handle allen key set
Metric "T" handle allen key set
3/8" Torx socket set
3/8" Metric Allen socket set
Security Torx set (snap-in)
Normal dykes
Flat top dykes
The tool you use for "C" clips
Dead blow hammer
Drift set
Punch set
assorted screwdrivers (like 8 or so)
Snap On 14.4v Impact Gun
OEM Rear brake tool
Motive bleeder w/ bottle
1 aluminum (HF) floor jack
1 sears floor jack
4 AC 3000N jack stands
2 Sears jack stands
1 Sears spring compressor kit
1 Sears fluid pump
1 8gallon fluid container
5 fluid funnels
2 steel wheel chocks
1 1/2" torque wrench (foot pound)
1 3/8" torque wrench (inch pound)
1 Longacre leak down tester
1 Dremmel kit (used mostly for automotive)
1 SnapOn 4 drawer box (pic when new, does NOT still look like that)
<img src="http://www.boom.net/~ryans4/random/SnapOn/3.jpg">
I think that's most of it.
Coming soon...
Gear Wrench 7pc Metric Stubby set
Gear Wrench 7pc Flex Head Metric set
Vice Grip 10pc Plier set
Crafstman 5pc Pry Bar set
#4
Former Vendor
Join Date: Dec 2000
Location: San Diego, CA
Posts: 15,545
Likes: 0
Received 0 Likes
on
0 Posts
Oh boy..
Metric sockets 1/4, 3/8, 1/2
Impact sockets 1/2
Standard sockets 1/2, 3/8, 1/2
Metric deep sockets 1/4, 3/8, 1/2
Metric half deep sockets 3/8
1/4, 3/8, 1/2 rachets various
Combo wrenches 7mm->21mm
Offset box 19,20,21,22
Hazet offset box 9mm->19mm
Crows foots
Extension 1/4, 3/8, 1/2 various lengths
Breaker bars 3/8, 1/2 various lengths
Torque wrench 1/2
hex sockets, torx sockets
U-joints
Screw drivers
adjustable wrenches
vise grips
slip joint pliers, robogrips
various assortment of pliers
dead blow, ball peen, 3lb sledge (for those stubborn bolts)
pry bars
tap/die set
pressure bleeder
drill bits
14.4v cordless drill
Dremel
table vise
2 jack, 6 jack stands
1 lift (coming soon!)
Branick spring compressor, RTI spring compressor, Sir tools spring compressor
various specialty tools for MB, VW
Craftsman rolling 6 drawer chest with 6 drawer top chest
And probably a bunch of little things I can't recall. Easily $5-6k of stuff (with the lift)
Impact sockets 1/2
Standard sockets 1/2, 3/8, 1/2
Metric deep sockets 1/4, 3/8, 1/2
Metric half deep sockets 3/8
1/4, 3/8, 1/2 rachets various
Combo wrenches 7mm->21mm
Offset box 19,20,21,22
Hazet offset box 9mm->19mm
Crows foots
Extension 1/4, 3/8, 1/2 various lengths
Breaker bars 3/8, 1/2 various lengths
Torque wrench 1/2
hex sockets, torx sockets
U-joints
Screw drivers
adjustable wrenches
vise grips
slip joint pliers, robogrips
various assortment of pliers
dead blow, ball peen, 3lb sledge (for those stubborn bolts)
pry bars
tap/die set
pressure bleeder
drill bits
14.4v cordless drill
Dremel
table vise
2 jack, 6 jack stands
1 lift (coming soon!)
Branick spring compressor, RTI spring compressor, Sir tools spring compressor
various specialty tools for MB, VW
Craftsman rolling 6 drawer chest with 6 drawer top chest
And probably a bunch of little things I can't recall. Easily $5-6k of stuff (with the lift)
#6
Not going to list it all but I have two craftmen 15 draw tool boxes
filled with everything sockets 1/4 3/8 1/2 and 3/4 drive, rachets, screwdrivers, plyers, taps, dies, drills, pry bars, etc.
For the bigger stuff,
Huge Drill press
chop saw
Big band saw
Big *** bead blaster cabnit
dual stage(i think it is called) air compressor
every air tool you could think of
parts washer
belt sander
two grinders
5 jacks
16 jack stands
engine stand
spring compressor
Huge cabnit with all SS nuts/bolts/washers
and my newest toy
Thermal Arc Tig welder.
Only thing I don't have is a lift
Tire machine and balancer
Brake leathe(sp)
Alignment rack
But my friend has them at his house so I am set. :-)
For the bigger stuff,
Huge Drill press
chop saw
Big band saw
Big *** bead blaster cabnit
dual stage(i think it is called) air compressor
every air tool you could think of
parts washer
belt sander
two grinders
5 jacks
16 jack stands
engine stand
spring compressor
Huge cabnit with all SS nuts/bolts/washers
and my newest toy
Thermal Arc Tig welder.
Only thing I don't have is a lift
Tire machine and balancer
Brake leathe(sp)
Alignment rack
But my friend has them at his house so I am set. :-)
#7
And that's why I will buy Japanese or European for the rest of my life! HAHA
Toyota, Audi, and Triumph...all metric. CRAP! Of course if I put that Ford 302 V8 in the Triumph I'm screwed! I will need SAE. More than the 3 or 4 wrenches I have and 20 sockets in a set I have. DOH!