Hybrid Owners (K04/K16, K04/RS6, K04/K24) : Customized ECU from Unitronic (Project)
#1
AudiWorld Senior Member
Thread Starter
Join Date: Sep 2002
Posts: 1,698
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://www.audiworld.com/forums/images/icons/icon1.gif)
I'm doing a quick survey for Mike from Unitronic (the Crazy Polish Guy).
Mike is currently working on a customized ECU for my own setup. Not even finished, it produces better results than GIAC X/XR + Lemmi, better peak and area under the curve, good timing, a/f ratio, knocking, etc etc... Best of all, it doesn't require Lemmiwinks (offsets). So the question is how many of you would be interested in having a customized chip for hybrid turbos...
- K04/K16 or K04/RS6 or K04/K24
- Octane 91 or 93/94
- Would use "standardized" fueling parts: for ex.: 85mm ID MAF Housing / Greentops 42# / Open Element or RS4 Airbox / MBC or EBC.
- No Lemmiwinks required
- Would Use standard MAF Sensor (Bosch or Hitachi)
- Before / After Dyno Runs (Mustang AWD) will be provided in order to compare power curves.
Any comments or questions are appreciated.(trolls not included)
Mike is currently working on a customized ECU for my own setup. Not even finished, it produces better results than GIAC X/XR + Lemmi, better peak and area under the curve, good timing, a/f ratio, knocking, etc etc... Best of all, it doesn't require Lemmiwinks (offsets). So the question is how many of you would be interested in having a customized chip for hybrid turbos...
- K04/K16 or K04/RS6 or K04/K24
- Octane 91 or 93/94
- Would use "standardized" fueling parts: for ex.: 85mm ID MAF Housing / Greentops 42# / Open Element or RS4 Airbox / MBC or EBC.
- No Lemmiwinks required
- Would Use standard MAF Sensor (Bosch or Hitachi)
- Before / After Dyno Runs (Mustang AWD) will be provided in order to compare power curves.
Any comments or questions are appreciated.(trolls not included)
#4
![Default](https://www.audiworld.com/forums/images/icons/icon1.gif)
Both seem capable of turning out quality code very quickly now, just need the dyno time and fuel options/things for them to do.
If I ever make it into a bigger BW setup I'll definitely have an ECU built for it.
If I ever make it into a bigger BW setup I'll definitely have an ECU built for it.
#6
![Default](https://www.audiworld.com/forums/images/icons/icon1.gif)
I'd imagine interest would mainly be based on location - im close to ASP so thats where i'd go, if this unitronic place is closer to others, it may work out better for them.