My plan is to re-surface my flywheel... What should I know before doing it...
#1
AudiWorld Senior Member
Thread Starter
Join Date: Sep 2002
Posts: 1,698
Likes: 0
Received 0 Likes
on
0 Posts
My plan is to re-surface my flywheel... What should I know before doing it...
The tranmission is down, the clutch is being replaced with an ECS Tuning Stage 3 clutch. I didn't want to put a light flywheel, I hate the chatter so much...
So now, I got to resurface the stock one ; what I should know before doing it?
So now, I got to resurface the stock one ; what I should know before doing it?
#3
I think Dahlback carries one
<center><img src="http://216.110.167.205/~dbrace/audi/rs4/koppling.jpg"></center><p>from their website:
<b>Solid fylwheel and reinforced clutch for the Audi S4 2.7. Avoids slipping clutch and vibrating flywheel at high power outputs. We have tested these kits for two year with very good results. Available in two versions for 670 Nm and 780 Nm respectively.
</b><ul><li><a href="http://www.tjmmotorsports.com">http://www.tjmmotorsports.com</a</li></ul>
<b>Solid fylwheel and reinforced clutch for the Audi S4 2.7. Avoids slipping clutch and vibrating flywheel at high power outputs. We have tested these kits for two year with very good results. Available in two versions for 670 Nm and 780 Nm respectively.
</b><ul><li><a href="http://www.tjmmotorsports.com">http://www.tjmmotorsports.com</a</li></ul>
#4
I think New Dimensions does it...
I had a mechanic do mine, turns out the flywheel was broken anyways so I ate the $180 resurfacing. Better to go with someone who knows what they're doing I think...
#6
Ship it to us. We offer that service. Dozens of your fellow S4 owners have trusted us.
<center><img src="http://www.newdimensions.com/jason/s4_fw/s4_fw03.jpg"></center><p>
We take your old one, and make it like new.
We take your old one, and make it like new.
Thread
Thread Starter
Forum
Replies
Last Post
EuroTrasher
Audi 4000 / Coupe GT Discussion
2
03-31-2006 12:08 AM
Quattro527
A4 (B6 Platform) Discussion
6
08-22-2003 07:57 AM