S4 / RS4 (B5 Platform) Discussion Discussion forum for the B5 Audi S4 & RS4 produced from 1998-2002

Need advice for good location to install Lidatek LE-30 transponder with RS4 bumper...

Thread Tools
 
Search this Thread
 
Old 11-29-2005, 12:32 PM
  #1  
AudiWorld Super User
Thread Starter
 
3Scanner's Avatar
 
Join Date: Sep 2002
Posts: 3,320
Likes: 0
Received 0 Likes on 0 Posts
Default Need advice for good location to install Lidatek LE-30 transponder with RS4 bumper...

I've STFA, seen sample photos and read write-ups for placing the unit behind the grille area. I'd like to attach it in a different location since (a) I'm worried that the jarring caused by opening an closing of the hood might affect the transponder's position if it is placed in behind the main grille and (b) my license plate sits very low on my RS4 bumper, so I'd like to get the transponder as close to the plate and main bumper cover facia as possible.

Here's a picture of where I'm thinking of installing the single transponder (I need to save up more $$$ before I can get a second transponder). I will likely pick the area highlighted in red on the driver's side as my first option.

<img src="http://pictureposter.audiworld.com/43051/locations_for_l-jammer.jpg">

I noticed that there aren't too many places behind the lower grille area where I can attach the transponder's brackets, since the RS4 bumper mounting areas behind the lower grill section are different from the stock bumper. If any of you have the RS4 bumper and have done a similar type of install please offer advice.

TIA.
Old 11-29-2005, 12:36 PM
  #2  
AudiWorld Super User
 
DanosS4's Avatar
 
Join Date: Mar 2002
Posts: 11,634
Likes: 0
Received 0 Likes on 0 Posts
Default cut out one of the bars and mount it inside one of the audi rings, if it will fit.

mine is mounted to one of the flat bars on the stock grill.
Old 11-29-2005, 12:42 PM
  #3  
AudiWorld Super User
Thread Starter
 
3Scanner's Avatar
 
Join Date: Sep 2002
Posts: 3,320
Likes: 0
Received 0 Likes on 0 Posts
Default Yes, but won't it sit too high from where my license plate is currently located? How about ...

movement after you slam the hood close? Have you had to adjust the transponder at all over time because of the jarring?
Old 11-29-2005, 12:46 PM
  #4  
AudiWorld Super User
 
DanosS4's Avatar
 
Join Date: Mar 2002
Posts: 11,634
Likes: 0
Received 0 Likes on 0 Posts
Default

it's never moved
Old 11-29-2005, 01:03 PM
  #5  
AudiWorld Super User
 
Audeye A6's Avatar
 
Join Date: Dec 2003
Posts: 4,246
Likes: 0
Received 0 Likes on 0 Posts
Default

I think it would better and more concealed there.
Old 11-29-2005, 01:10 PM
  #6  
AudiWorld Super User
 
TwinTurboTerror's Avatar
 
Join Date: Apr 2000
Posts: 13,290
Received 12 Likes on 7 Posts
Default Did you fill in the euro plate indent on your bumper? Otherwise I'd suggest mounting your plate the

way I have on my car (with moulding tape).
Old 11-29-2005, 01:28 PM
  #7  
AudiWorld Super User
 
EdyJun's Avatar
 
Join Date: Dec 2002
Posts: 2,718
Likes: 0
Received 0 Likes on 0 Posts
Default What state are you in, are radar (laser) jammers legal in your state?

I am in CA and if a cop here suspects that I have one he has the right to search my car. So I am still trying to find a way to install it that the cop can not find it.

Edy
Old 11-29-2005, 01:39 PM
  #8  
AudiWorld Senior Member
 
Beeman'S4's Avatar
 
Join Date: Jul 2002
Posts: 1,459
Likes: 0
Received 0 Likes on 0 Posts
Default Federal level, radar detectors legal, radar jammers illegal (under FCC jurisdiction), laser jammers

legal (under FDA jurisdiction).

I know some states (VA, and another one out West?and all of Canada IIRC) laser detectors also illegal.
Old 11-29-2005, 01:58 PM
  #9  
Rest In Peace
 
O.W. Kenobi's Avatar
 
Join Date: May 2001
Posts: 19,404
Likes: 0
Received 0 Likes on 0 Posts
Default Mine hasn't fallen out of adjustment since I mounted it.

I replaced the foam tape once, but that was it. Otherwise, it's been trouble-free and it's worked very well. You get an 18 inch radius, so you should be fine there.<ul><li><a href="https://www.audiworld.com/tech/elec93.shtml">https://www.audiworld.com/tech/elec93.shtml</a</li></ul>
Old 11-29-2005, 02:58 PM
  #10  
AudiWorld Super User
Thread Starter
 
3Scanner's Avatar
 
Join Date: Sep 2002
Posts: 3,320
Likes: 0
Received 0 Likes on 0 Posts
Default

No, bumper indent still there. Where is your transponder located?


Quick Reply: Need advice for good location to install Lidatek LE-30 transponder with RS4 bumper...



All times are GMT -8. The time now is 08:35 AM.